Seat ALTEA FREETRACK Owner's Manual page 253

– Place the wheel with the defective tyre in the luggage compart-
ment and secure it.
– Check the tyre pressure of the newly fitted tyre as soon as pos-
sible.
– Have the tightening torque of the wheel bolts checked as soon
as possible with a torque wrench. The prescribed torque must
be 120 Nm.
Note
● If you notice that the wheel bolts are corroded and difficult to turn when
changing a wheel, they must be replaced before having the wheel bolt tight-
ening torque checked.
● For safety reasons, drive at moderate speeds until the wheel bolt tight-
ening torque has been checked.
Safety First Operating Instructions
Wheel trims
The wheel trims must be removed to gain access to the
wheel bolts.

Removing
– Insert the extraction hook from the tools into the designated
ring, located in one of the bolt hole covers of the wheel cover
⇒ F ig.
169.
– Pull off the hub cap.
Practical Tips
If and when 251
Fig. 169 Changing a
wheel: Removing a hub
cap

Technical Specifications