Optional Connections; Connecting To A Cable Box Or Satellite Receiver - Philips DVDR3355/02B User Manual

Antenna/ cable
TV signals
A
Connecting to a Cable Box or
Satellite Receiver
Option 1
If your Cable Box/Satellite Receiver
has only an antenna output socket
(RF OUT or TO TV),
refer to "Connecting the antenna cables"
on page 12 for the complete connection
to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
1_dvdr3355_eu_eng_15891.indd 15
IN
VIDEO AUDIO
RF
R
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
A
B
C

Optional Connections

OUT
TO TV
S-VIDEO
L
C
B
Option 2
If your Cable Box/Satellite Receiver
has Scart output socket
Remain with the existing antenna
connection from the Cable Box/Satellite
Receiver to your TV.
Use the scart cable to connect EXT1
TO TV-I/O socket on the DVD
recorder to the corresponding SCART
input socket on the TV.
Use another scart cable to connect the
EXT2 AUX-I/O socket on the DVD
recorder to the Scart output socket (or
labelled as TV OUT or TO TV) on the
Cable Box/Satellite Receiver.
To start playback, select the TV channel
directly on the Cable Box/Satellite
Receiver. The DVD recorder will
automatically send the video/audio signals
from EXT2 AUX-I/O socket to
EXT1 TO TV-I/O socket. You will then
see the picture from the additional device
on your TV, even if the DVD recorder is
turned off.
Back of a Cable Box
or Satellite Receiver
(Example only)
15
2005-04-27 2:35:43 PM