Siemens SIMATIC Box PC 820 Manual page 78

Motherboard
Menu Structure
The screen is divided into four parts. In the top part, you can select the menu
forms [Main], [Advanced], [Security], [Power], [Boot Sequence], [Version], [Exit]. In
the left of the center part you can select various settings or submenus. Brief help
texts appear on the right for the currently selected menu entry. The bottom part
contains information for operator inputs.
Yellow stars to the left of the interface designation (for example, Internal COM 1)
indicate a resource conflict between the interfaces managed by the BIOS. In this
case you should select the default settings (F9) or eliminate the conflict.
You can move between the menu forms using the cursor keys [←] and [→].
Menu
Main
Advanced
Security
Power
Boot Sequence The order of possible bootable devices is determined here.
Version
Exit
ENTER Key
Press the Enter key to open a pop-down menu in which you can use the cursor
keys to move and make selections. To exit one of these menus, press either ESC
(exit without changes) or Return (selected setting becomes effective when device
is rebooted).
If a line is marked with a triangle it contains a submenu. You can exit a submenu
by pressing ESC. The changes you have selected will become effective when the
device is rebooted.
2-40
System functions are set here
An extended system configuration can be set here
Security functions are set here, for example, a password
Power saving functions can be selected here
Device-specific information is displayed here
Used for terminating and saving
Meaning
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03