Motherboard - Siemens SIMATIC Box PC 820 Manual

Motherboard

Chapter Overview
Section
2.1 Components and Interfaces
2.2 Processor
2.3 Memory
2.4 VGA Onboard
2.5 Changing the Backup Battery
2.6 Block Diagram of the Motherboard
2.7 Hardware Ports
2.8 Assignment of Connectors and Ports
2.8.1 Assignment of the IDE Ports, X3 Secondary, X4 Primary
2.8.2 Assignment of the EISA Riser X1 on the Motherboard
2.8.3 Battery Connection, X24
2.8.4 Internal Keyboard / Mouse / Inverter Connection for FI45, X44
2.8.5 Direct Key Module (Internal Box) FI45, X45
2.8.6 Internal Keyboard Connection for Box PC 820, X6
2.8.7 Internal COM2 Interface, X911
2.8.8 Voltage Supply for CD-ROM Drive, X25
2.8.9 Setting the Power Supply for the Display, X408
2.8.10 CMOS (Universal) Interface for TFT Displays, X401
2.8.11 LVDS Interface (Single Chip LVDS), X409
2.8.12 Selection of Display Type / Polarity of Backlight-On Signal
(Switch S1)
2.8.13 VGA
2.8.14 PS/2 Mouse Connection, X7
2.8.15 Keyboard-Mouse Connection, X6
2.8.16 Assignment of the COM 1 Port, X10
2.8.17 Gender Changer for COM1
2.8.18 Assignment for the Floppy, X50
2.8.19 Assignment of the COM 2 Port, X11
2.8.20 Assignment of the Parallel Port, X9
Siemens Distributor
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
Description
2
Page
2-3
2-4
2-5
2-6
2-7
2-8
2-9
2-12
2-12
2-13
2-14
2-14
2-15
2-15
2-16
2-16
2-16
2-17
2-18
2-18
2-19
2-20
2-20
2-21
2-21
2-22
2-23
2-24
2-1