Table of Contents
Advertisement
DVD System Menu Options
CHANNEL SETUP settings
Tuner Input Source
System Menu - Channel Setup
Cable
Tuner Input Source
Channel Search
Search
Modify Channel Information
Edit
Channel Search
Modify Channel
Information
Channel
Name
Ch003
Frequency
55.26MHz
TV System
PAL B/G
Skip
No
Fine tune
OK
Cancel
OK
56
(underlined options are the factory default settings)
Set the tuner input source for the recorder.
1) Use
keys to highlight { Tuner Input Source } and
press
to access the options:
{ Cable }
– Select this if the recorder is connected via
a cable box/satellite receiver.
{ Air }
– Select this if the recorder is connected
directly to the antenna wall outlet.
2) Press OK to confi rm your selection and press
the previous screen.
Automatically scans all the receivable analog local TV channels
and store them on the recorder.
1) Use
keys to highlight { Channel Search - Search }
and press OK on the remote control.
The automatic TV channel search will start. This process
may take several minutes. Once complete, the total number of
channels found will appear on the TV.
Adjust a stored TV channel to your preference, improve the
reception and the sound quality of that TV channel.
) Use
keys to highlight { Modify Channel Information
1
- Edit } and press
The channel menu appears.
2) Use
keys to select one of the options and press
{
Name }
– Use numeric keypad 0-9 to enter the TV
channel and press OK to confi rm.
{ Frequency }
– Adjust the frequency of the channel.
– Use
OK on the remote control to confi rm the
setting.
{ TV System }
– Set the TV system that produces the least
distortion of picture and sound.
– Use
and press OK to confi rm. (See chapter "TV
System Guide" at the back of this manual for
`
more information).
(continued)
.
keys to start manual search. Press
keys to select a suitable sound mode
to return to
.
Advertisement
Table of Contents
