Setting Your Tv Channel Programs - Philips DVDR3380/78 User Manual

Step 3: Installation and Setup
Setting your TV channel
programs
Before the recorder can start recording
the TV channel programs, you need to
search for the available TV channels and
store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
recorder, the TV and Satellite Receiver/
Cable Box (if any) and switched them on.
Tuner settings can only be changed
when there is no disc in the disc tray.
OK
A
Press SYSTEM-MENU on the remote
control.
The system menu appears on the TV.
B
Use keys to highlight
{ System Menu - Channel Setup }
and press .
System Menu - Channel Setup
Tuner Input Source
Channel Search
Modify Channel Information
TIPS: Press to access the options of an item in the menu.
Press SYSTEM-MENU to exit the menu.
24
C
Use
Input Source } and press OK.
{ Cable }
Select this if the DVD recorder is
connected directly to the cable signal or
through a set-top box.
{ Air }
Select this if the DVD recorder is
connected directly to an indoor or
outdoor antenna.
D
Press OK to confi rm.
E
Use
Search } and press OK.
The automatic TV channel search
starts. This process may take several
minutes. Once complete, the total number
of channels found will appear on the TV.
SYSTEM
To modify or sort the TV channels,
MENU
see the chapter "DVD System Menu
Options – CHANNEL SETUP
settings."
Cable
Search
Edit
(continued)
keys to highlight { Tuner
keys to highlight { Channel