Channel Setup Settings - Philips DVDR3400 User Manual

DVD Setup Menu Options

CHANNEL SETUP settings

Channel Search
Modify Channel
Information
Channel
Name P001/Ch003
Scan mode Frequency
Frequency
585.26MHz
TV System PAL B/G
NICAM On
Audio
DUAL A
Skip No
Fine-tune
OK CANCEL
OK
58
This option automatically scans all the receivable analog local TV
channels and stores these channels on the recorder.
Press OK on the remote control to start the automatic TV
channel search process and replace all previously stored analog
TV channels. This process may take several minutes.
Adjust a stored TV channel to your preference and improve the
reception and the sound quality of that TV channel.
1) Use keys to highlight { Modify Channel Information }
and press OK to view the channel menu.
2) Use keys to select one of the options and press OK.
{ Name } – Use the numeric keypad 0-9 to select the
channel preset number that you wish to
change.
– To rename the channel, press
– Use
in the keyboard screen and press OK to
select.
characters.
– Select
your entry or
OK to exit.
{ Scan Mode } – Select TV channel search mode based on
channel allocation or frequency (Channel, S-
Channel or Frequency) and press OK to
confi rm.
{ Frequency } – Show the frequency of the current TV
channel. If required, use
manually search and press OK to confi rm.
{ TV System } – Use
that produces the least distortion of picture
and sound, then press OK to confi rm. (See
chapter "TV System Guide" at the back of
this manual for more information).
{ NICAM } – NICAM is a digital sound transmission
system. It can transmit either one stereo
channel or two separate mono channels.
{ On }
{ Off }
(continued)
keys to highlight a character
The maximum input is up to 5 (fi ve)
on the keyboard to confi rm
OK
to abort, then press
EXIT
keys to select a suitable TV system
– Improve the sound transmission
of the TV channel.
– Select this if the reception is poor
and the sound is distorted.
.
keys to