Configuration > Ces > Link > Vlan - Net2Edge PB-TDM1-CONTRA Quick Setup Manual

Transition Networks
Configuration > CES > Link > VLAN
This page lets you configure QOS and VLAN for all Logical Links.
The displayed items are:
Link
The logical link number.
Settings Name
The optional name the user can configure for the logical link.
QOS Type
Type of Quality of Service for each Link (Diffserv or Type of Service).
QOS Value
The Quality of Service Value for each Link.
For Diffserv, this value is a Diffserv CodePoint (DSCP) in the range 0 - 63.
For Type of Service, this value is in the range 0 - 255.
VLAN Tagging State
Enable or Disable VLAN Tagging per each Link.
enabled, then the ingress Ethernet port(s) must be configured in a VLAN aware mode in order
to allow VLAN tagged address resolution frames to be recognised and processed.
VLAN Tagging Identifier
The VLAN Id for each Link.
VLAN Tagging Priority
VLAN Tagging Priority value for each Link. The default is priority 0.
33604 Rev. A
Note: If any logical link has VLAN tagging
www.transition.com
Contra Converter Quick Setup Guide
Page 14 of 72