Net2Edge PB-TDM1-CONTRA Quick Setup Manual page 71

Transition Networks
Related CLI Commands
Command: Show System Config
Syntax: show system config
Description: Display the current Contra Converter system config parameters:
Example: Display the current parameters:
>sys conf
System Contact :
System Name :
System Location :
ZTP Auto Disc : Enabled
MAC Address : 00-c0-f2-56-24-90
Software ID : PB-TDM-CONTRA
Product ID : PB-TDMCONTRA-AC
Serial # : 0
Board Rev : 1
Board Temp : 45 C
CPU Temp : 58 C
Chip ID : VSC7424 Rev. D
System Time : -
System Uptime : 2d 09:33:37
Software Version: PB-TDM-CONTRA (standalone) 1.9.2_CONTRA_TEST_2
Software Date : 2014-08-19T17:00:54+01:00
Previous Restart: Cold
>
Command: Show System Version
Syntax: show system version
Description: Display the current Contra Converter system version information:
Example: Display the current parameters:
>sys ver
Version : PB-TDM-CONTRA (standalone) 1.9.2_CONTRA_TEST_2
Build Date : 2014-08-19T17:00:54+01:00
>
33604 Rev. A
(ZTP not completed)
www.transition.com
Contra Converter Quick Setup Guide
Page 71 of 72