Net2Edge PB-TDM1-CONTRA Quick Setup Manual page 51

Transition Networks
Command: Set Up CES Link Active Schedule
Syntax: ces link setup schedule
[<tue_stop>] [<wed_start>] [<wed_stop>] [<thu_start>] [<thu_stop>] [<fri_start>] [<fri_stop>]
[<sat_start>] [<sat_stop>] [<sun_start>] [<sun_stop>]
Description: Update the schedule of when a logical link will be active, where:
<link>
enable|disable: Whether scheduling is enable or disabled.
<mon_start> : Schedule Monday Start Time.
<mon_stop>
<tue_start> : Schedule Tuesday Start Time.
<tue_stop>
<wed_start> : Schedule Wednesday Start Time.
<wed_stop>
<thu_start> : Schedule Thursday Start Time.
<thu_stop>
<fri_start> : Schedule Friday Start Time.
<fri_stop>
<sat_start> : Schedule Saturday Start Time.
<sat_stop>
<sun_start> : Schedule Sunday Start Time.
<sun_stop>
Note: Schedule times must be in HHMM format, between 0000 and 2359.
The Schedule stop time must be later than the start time.
Example: Schedule logical link 1 to be active Mondays from 11:00 to 12:00 AM:
>ces link setup schedule 1 enable 1100 1200
CES Logical Link 1 Schedule
===========================
Schedule:
Monday Start:
Monday Stop:
Tuesday Start:
Tuesday Stop:
Wednesday Start:
Wednesday Stop:
Thursday Start:
Thursday Stop:
Friday Start:
Friday Stop:
Saturday Start:
Saturday Stop:
Sunday Start:
Sunday Stop:
>
33604 Rev. A
<link> [enable|disable] [<mon_start>] [<mon_stop>] [<tue_start>]
: Logical Link number (1 to 128, may be less on some products).
: Schedule Monday Stop Time.
: Schedule Tuesday Stop Time.
: Schedule Wednesday Stop Time.
: Schedule Thursday Stop Time.
: Schedule Friday Stop Time.
: Schedule Saturday Stop Time.
: Schedule Sunday Stop Time.
Enabled
11:00
12:00
00:00
00:00
00:00
00:00
00:00
00:00
00:00
00:00
00:00
00:00
00:00
00:00
www.transition.com
Contra Converter Quick Setup Guide
Page 51 of 72