Philips HDRW720/05 Quick Install Manual page 9

If no data is available from the GUIDE Plus+
recording is made from a satellite receiver connected to the EXT1
TO TV-I/O , EXT2 AUX-I/O socket, the time bar will not display any
data on the beginning, end, and title of the TV show.
1 In case the time bar of the Time Shift Buffer is not visible on the
screen, press INFO on the remote control.
2 Press REC/OTR n .
P
The red light around the record button n on the front will
switch on.
P
'1 Programm +30' will appear on the screen on the right end
of the time bar. . This indicates that the recording will
automatically end after 30 minutes. Press
REC/OTR n several times to prolong the switch-off time.
Recording the previous TV show
REC/OTR n
RED
You can also start a recording immediately, regardless of the
recordings in the Time Shift Buffer.
1 Hold down REC/OTR n until the red light on the record button
n at the front switches on.
® system, or in case the
D C
C D
RED
Recordings will be automatically ended if data from the GUIDE Plus+
is available or if you entered the end while starting a recording
(30-minute steps).
1 If necessary, switch the TV set to the programme number (input
socket) of the DVD recorder.
2 Press STOP h
P
A message appears on the screen, asking whether you really
want to end the recording.
If you want to end the recording, select '
confirm with OK .
If you do not want to end the recording, confirm '
OK .
STOP h
D
INFO
3 To permanently store the recording on the hard disk, you have to
erase the Time Shift Buffer. The following options are available:
the preset Time Shift Buffer period expires (the default setting
is 3 hours)
the Time Shift Buffer is manually erased ('
'function( SYSTEM MENU button, '
you turn off the DVD recorder with STANDBY m
you switch to camera mode using CAM (switch back with the
same function button).
®
' with D and
' using
'menu ))