Please enter here the data of the TV channels in the GUIDE Plus+
System. This can be helpful if you have to install the GUIDE Plus+
System again or other situations.
Using a pencil helps you to make changes afterwards.
•
All data of the GUIDE Plus+
hours).
•
All TV channels have been allocated to the right programme
numbers Read in the instruction manual the chapter 'Additional
installation features' the section 'allocating/deleting TV channels
manually'.
STANDBY m
•
If you have connected an external Receiver (Satellite receiver, cable
box, ...) write also the programme number of the TV channel from
the external receiver in this list.
•
You will find this table in the DVD-Recorder as follows:
- Switch the DVD-Recorder on
- Press GUIDE/TV on the remote control
- Select the menubar using A ,
- Press as often as necessary C until the field '
- Copy the displayed table in this list.
- You can go up/down one page using CHANNEL q ,
CHANNEL r .
The amount of channels is depending on your setup/devices.
®
System has been loaded. (after 24
' is marked.
B
D
C
®
®