Transporting - Wallenstein GE605 Operator's Manual

6

TRANSPORTING

• Comply with state and local laws govern-
ing safety and transporting of machinery on
public roads.
• The use of flashing amber lights is ac-
ceptable in most localities. However some
localities prohibit their use. Local laws
should be checked for all highway lighting
and marking requirements.
• At all times, when driving the tractor and
equipment on the road or highway under 20
mph (32 km/h) use flashing amber warn-
ing lights and a slow moving vehicle (SMV)
identification emblem. Do not exceed 20
mph (32 km/h). Reduce speed on rough
roads and surfaces.
• Plan your route to avoid heavy traffic.
Wallenstein Backhoes are designed to be easily and conveniently moved from work site to work site. When
transporting, follow this procedure:
1. Be sure all bystanders are clear of the machine.
2. Clean off any debris on the backhoe and bucket
3. Fully retract the boom and bucket.
35
TRANSPORT SAFETY
Main Boom
Pin Lock
• Always install transport lock pins and re-
tainers before transporting.
• Do not drink and drive.
• Be a safe and courteous driver. Always
yield to oncoming traffic in all situations,
including narrow bridges, intersections,
etc. Watch for traffic when operating near
or crossing roadways.
• Turn into curves or go up or down hills
only at a low speed and a gradual steering
angle. Make certain that at least 20% of
the tractor's weight is on the front wheels
to maintain safe steerage. Slow down on
rough or uneven ground.
• Never allow riders on either tractor or
machine.
4. Be sure that the swivel and swing boom pin
locks are in place and retainers are installed in
each lock pin.
5. Be sure the SMV (Slow Moving Vehicle) sign is
on the backhoe dipper..
Boom
Swivel Pin