Operation; To The New Operator Or Owner - Wallenstein GE605 Operator's Manual

4

OPERATION

1. Please remember it is important that you read and
heed the safety signs on the Backhoe.
2. Ensure subframe is firmly attached and all hardware
is torqued to specifications to prevent Backhoe from
moving when digging.
3. Attach the tractor side plate to reinforce the frame if
required. Do not overload the tractor frame.
4. Review maps of underground utilities before start-
ing to dig. Remove all sticks, stones, roots, and
wires from working area before starting. Take care
not to contact overhead and underground obstruc-
tions during operation.
5. Never operate controls from the ground. Operate
only from the operator's seat to prevent unexpected
boom movement that can lead to crushing between
frame members.
6. Do not dig under machine or stabilizers. A cave-in
could result and the machine could fall into the
excavation.
7. Lower stabilizers to the ground to support machine
before starting to dig.
8. Do not exceed machine lift capacity. Overloading
can cause structural damage and lead to unsafe
operating conditions.
NOTICE
Wallenstein backhoes are designed to operate at a specific flow rate. Operating the backhoe above the
specified flow rate will cause damage to the seals and will void the warranty.
GE605 3.5-6 gpm (13.3-22.8 Lpm)
GX Series 5-7 gpm (18.9-26.5 Lpm)
NOTICE
When mounting a GE605 or GX620 backhoe to a skid steer that has a flow rate greater than 8 GPM
(32 Lpm), BFC501 Flow Divider Kit is required to prevent damage to the seals and voiding the warranty.
4.1

TO THE NEW OPERATOR OR OWNER

The Wallenstein Backhoes are a light duty ma-
chine that attaches to the subframe of a sub-com-
pact, compact or utility tractor, or a mini skidsteer
or skidsteer and can be used for all light duty
digging, trenching and excavating. Be familiar with
the machine before starting.
It is the responsibility of the owner or opera-
tor to read this manual and to train all other
operators before they start working with the
machine. Follow all safety instructions exactly.
Safety is everyone's business. By following
recommended procedures, a safe working
19
OPERATING SAFETY
9. Position Backhoe so that loads extend directly be-
hind machine when lifting or placing heavy objects.
10. Never carry, lift or move people on boom or bucket.
11. Never place any part of your body where it would
be in danger if movement should occur during as-
sembly, installation, operation, maintaining, repair-
ing, removal or moving.
12. Do not walk or work under a raised machine or
attachment unless it is securely blocked or held
in position. Do not depend on the tractor hydraulic
system to hold the machine or attachment in place.
13. Do not allow riders on this machine at any time.
There is no safe place for any riders.
14. Before you operate the machine, check over all hy-
draulic lines, hoses, connections and components.
Replace any worn or damaged parts immediately.
Tighten all leaking fittings.
15. Do not allow anyone who is not familiar with the
safety rules and operation instructions to use this
machine. Review safety instructions annually.
environment is provided for the operator,
bystanders and the area around the work site.
Untrained operators are not qualified to use
the machine.
Many features incorporated into this machine
are the result of suggestions made by custom-
ers like you. Read this manual carefully to learn
how to use the Backhoe safely and how to set it
to provide maximum field efficiency. By following
the using instructions in conjunction with a good
maintenance program, your Backhoe will provide
many years of trouble-free service.