Table of Contents
Advertisement
Setup Menu Options
Audio settings
Downmix
Digital Output
Night Mode
48
dvdr3480-05n31_eng_27233.indd 48
dvdr3480-05n31_eng_27233.indd 48
(continued)
(underlined options are the factory default settings)
Select the method for audio downmix to two channels when you
play a DVD which is recorded in Dolby Digital format.
{ LT/RT }
{ Stereo }
This setting is only required if you are using the recorder's
coaxial socket to connect other audio/video device.
{ PCM }
{ Auto }
This mode optimises playback of sound at low volume. High
volume outputs will be softened and low volume outputs are
brought upward to an audible level.
{ On }
{ Off }
– Select this if the recorder is connected to
a Dolby Pro Logic decoder.
– Select this to downmix the multi-channel
audio signals to two channels which
delivers sound from only the two front
speakers.
– Select this if the connected device is not
capable of decoding multi-channel audio.
The system will convert the Dolby Digital
and MPEG-2 multi-channel signals to PCM
(Pulse Code Modulation).
– The audio signals will be output according
to the audio stream on disc.
– Turn on night mode.
– Turn off night mode feature. Selects this
to enjoy surround sound with its full
dynamic range.
2008-03-14 4:00:48 PM
2008-03-14 4:00:48 PM
Advertisement
Table of Contents
