Table of Contents
Advertisement
PREFERENCES settings
Reset Menu
Settings
Screensaver
AUDIO settings
(underlined options are the factory default settings)
SPDIF Output
LPCM Output
Setup Menu Options
(underlined options are the factory default settings)
Press
to reset the menu settings of this recorder.
A warning message will appear. Select
proceed or
to abort, then press
OK
CANCEL
The screen saver prevents damage to the TV screen by
avoiding exposure to a static image for too long.
Press
to access this menu and use
the options.
On
{
}
– Select this if you wish to turn off the TV screen, after
playback had been stopped or paused for more than
15 minutes.
Off
{
}
– Select this to disable the screen saver.
Press
to access this menu and use
the options.
{ RAW }
– Select this if you have used the recorder's COAXIAL
OUT jack to connect to a multichannel receiver.
{ LPCM }
– Select this if you have used the recorder's COAXIAL
OUT jack to connect to a stereo or audio/video
system.
This setting allows you to select between two levels:
{ LPCM 48 kHz} – Select this if the connected audio device is
capable of processing digital signal input with
sampling rates of 48 kHz. In addition, the disc
you are playing back must be recorded in 48kHz
LPCM format.
{ LPCM 96 kHz} – Select this if the connected audio device is
capable of processing digital signal input with
sampling rates of 96 kHz.In addition, the disc
you are playing back must be recorded in 96kHz
LPCM format.
(continued)
in the menu to
OK
OK
OK
to confi rm.
keys to select one of
keys to select one of
65
Advertisement
Table of Contents
