Preferences Settings; Audio Settings - Philips DVDR3360H User Manual

PREFERENCES settings

Reset Menu settings
Screensaver

AUDIO settings

SPDIF Output
LPCM Output
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu.
dvdr3360H-75_eng3.indd 65 dvdr3360H-75_eng3.indd 65
Setup Menu Options
(underlined options are the factory default settings)
Press to reset the menu settings of this recorder.
A warning message will appear. Select
proceed or
The screen saver prevents damage to the TV screen by
avoiding exposure to a static image for too long.
Press to access this menu and use
the options.
On
{ }
Off
{ }
(underlined options are the factory default settings)
Press to access this menu and use
the options.
{ RAW }
{ LPCM }
This setting allows you to select between two levels:
{ LPCM 48 kHz} – Select this if the connected audio device is
{ LPCM 96 kHz} – Select this if the connected audio device is
to abort, then press
OK
CANCEL
– Select this if you wish to turn off the TV screen, after
playback had been stopped or paused for more than
15 minutes.
– Select this to disable the screen saver.
– Select this if you have used the recorder's COAXIAL
OUT jack to connect to a multichannel receiver.
– Select this if you have used the recorder's COAXIAL
OUT jack to connect to a stereo or audio/video
system.
capable of processing digital signal input with
sampling rates of 48 kHz. In addition, the disc
you are playing back must be recorded in 48kHz
LPCM format.
capable of processing digital signal input with
sampling rates of 96 kHz.In addition, the disc
you are playing back must be recorded in 96kHz
LPCM format.
(continued)
OK
OK in the menu to
OK
to confi rm.
keys to select one of
keys to select one of
2005-10-17 3:12:40 PM 2005-10-17 3:12:40 PM
65