Connecting To A Vcr Or Other Similar Device - Philips DVDR5500/05B User Manual

Cable Satellite Antenna
ANTENNA
TO TV IN
HDMI OUT
B
Connecting to a VCR or
other similar device
This connection allows you to record
from a video tape to a DVD recordable
disc. It also allows the VCR to be used
for playback if the recorder is turned off.
IMPORTANT!
Your new recorder can replace the
VCR for all your recording needs.
Just unplug all the connections to
your VCR.
A
Connect the existing Antenna/Satellite
Receiver/Cable TV signal (usually labelled
as RF OUT or TO TV) to the
ANTENNA IN
recorder.
B
Connect the supplied RF antenna cable
from the ANTENNA TO TV
socket on the recorder to the antenna
input socket (usually labelled as VHF/UHF
RF IN) on your TV.
dvdr5500-05n31_eng_25722.indd 21 dvdr5500-05n31_eng_25722.indd 21
Step 2: Optional Connections
VHF/UHF
RF IN
VHF/UHF
RF OUT
A
VIDEO
2 1
EXT TO VCR/SAT EXT TO TV
(CVBS)
S-VIDEO
(Y/C)
VIDEO OUT
socket on the
Back of a VCR (example only)
SCART IN
SCART OUT
D
P Y
R
L
P B
R
COAXIAL
COMPONENT
AUDIO OUT
(DIGITAL OUT)
VIDEO OUT
C
S-VIDEO IN
C
Connect the scart cable from the EXT1
TO TV socket on the recorder to the
corresponding SCART input socket on
the TV.
D
Connect another scart cable from the
EXT2 TO VCR/SAT socket on the
recorder to the Scart output socket
(usually labelled as TV OUT or TO TV)
on the VCR.
Helpful Hints:
– Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
– Connect the recorder directly to the TV. If
there is a VCR or an additional device in
between, the picture quality may be poor
because of the copy protection system built
into this recorder.
(continued)
3139 241 25451
MAINS
TV
21
2007-05-30 10:03:47 AM 2007-05-30 10:03:47 AM