Maintenance; Warranty Limit; Limits Of Manufacturer Liability; Jt8 Remote Control For Aj 1000 To 2400 - Studer AJ Series User's And Installer's Manual

STUDER INNOTEC

Maintenance

The inverters of the AJ series do not need any
special maintenance. The casing may be
cleaned with a damp cloth (not wet).
In the case of malfunction, the inverter should
be sent back to the manufacturer for control in
its original packing.
Before sending the inverter, check the table
above.
The battery is loaded and is in accordance to
the inlet nominal tension of the device.
The consumer devices do not have any defects
or overload for the inverter.
Should you contact your salesperson, note the
following points before calling:
(you will find this information on the label
underneath the inverter)
- Series number
- Power of the inverter
- Inlet nominal voltage of the inverter
So you will have quick and efficient help to
solve your problem.

Warranty limit

The warranty will be considered void if the unit
has suffered any physical damage or alteration,
either internally or externally, and does not
cover damage arising from improper use like:
- Reverse of battery polarity
- Inadequate input voltage (over voltage)
- Back-feed of the inverter output by public
network , generator or any other source.
- Mechanical shock or deformation specially by
JT8
Remote control for
- Functions on remote control are the same as control and indicator on
the inverter (see above)
Remote control should be connected with the inverter with the
original 10m. STUDER cable or any RJ11/6p 1:1 cable up to max 50m.
- Contact with liquid or oxidation by conden-
- Use in inappropriate environment (dust, corro-
This warranty will not apply where the product
has been misused, neglected, improperly
installed, or repaired by anyone other than
Studer INNOTEC or a company authorised by
Studer INNOTEC. In order to qualify for the
warranty,
disassembled or modified

Limits of manufacturer liability

STUDER
installation, use and maintenance of the
inverter. Thus, we are not responsible for
damages, costs or losses resulting from an
installation which is not in accordance with the
regulations or inappropriate use or mainte-
nance.
The customer is always responsible for the use
of the inverters STUDER INNOTEC.
This device has not been designed and is not
warranted for use in life support apparatus or
any other critical device with potential risks of
important harm to people or to the environment.
We do not accept any responsibility for any
violation of patent rights or other third person
rights resulting from the use of the inverter.
STUDER INNOTEC keeps the right to modify
their products without previous notice.
AJ 1000-2400
AJ V2.0
AJ
transport due to an inadequate package.
sation
sive vapour, humidity, high temperature,...)
the product
INNOTEC
0!
7
must not be
.
cannot control the