Installing The Router - Cisco 800M Series Installing Manual

Chapter 2

Installing the Router

Figure 2-4 Installing the Router to the Wall
Note For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and
washers must be size number 10.
Route the cables so that they do not put a strain on the connectors or mounting hardware. To comply with
Step 4
IP 41, cables should be routed down relative to the router to prevent water from traveling on the cables.
Mounting on a Rack
The two brackets provided along with the router which can be used for wall mount or rack mount. These
brackets support mounted the router on a standard 19 inch rack. The brackets must be rotated 90 degrees
and used for mounting it on the rack.
Cisco 800M Series Integrated Services Router Hardware Installation Guide
2-6