Infrared Remote Controller - Carrier Niceday 42PHQ K Series Owner's Manual

Split system “hi-wall” indoor unit
Table of Contents

Advertisement

42PHW / 42PHQ / 42PHQ...K
Infrared remote control
Fix the remote control holder to the wall using the two screws.
The remote control operates with two 1.5 V non rechargeable
batteries.
When the symbol
appears in the display, this indicates that the
batteries are exhausted.
How to insert batteries:
Open sliding cover.
Remove the cover of the battery compartment at the back of the
remote control by sliding it out in the direction of the arrow.
A
A
I /O
B
TEMP.
MODE
FAN
C
CLOCK EVERYDAY HOUR MINUTE
K
TIMER
SET
ON
OFF
I
RST
TA
M
GB - 4
A
SLEEP
L
D
E
FLAP
N
F
G
H
CANCEL
J
• Remove the used batteries and insert new batteries.
The remote control uses two alkaline batteries (1.5 V, LR03x2).
• Press the RST button with a sharp object to reset the remote
control.
• Do not use used batteries or batteries of different types,
as this may cause the unit to malfunction.
• Batteries should only be changed after turning off the unit.
• The average battery life during normal use is approximately one
year.
• If the air conditioner does not operate normally after replacing
the batteries, remove the batteries, refit them and press the RST
button again after 5 seconds.
The maximum operating range for the remote control is approx. 5 m.
No obstructions such as curtains or plants should be between
control and unit. Direct sun on the unit receiver may interfere with
good signal reception.
The control must be directed toward the unit receiver when
pressing the buttons of the desired functions.
An acoustical acknowledgement sound (beep) will indicate that
signal has been received.
A.
Display readout
B.
On/Off button
C.
Mode selection button
D.
Increase temperature button
E.
Decrease temperature button
F.
Louvre control button
G.
Fan speed selection button
H.
Hour/minute setting buttons
I.
ON/OFF timer and current time buttons
J.
Set and cancel buttons
K.
Everyday timer button
L.
Sleep timer button
M.
Current time adjusting and reset buttons
N.
Address switch
SLEEP
I /O
TEMP.
MODE
FAN
FLAP
CLOCK EVERYDAY
HOUR
MINUTE
TIMER
SET
CANCEL
ON
OFF
RST
TA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Niceday 42phwNiceday 42phq

Table of Contents