VeriLy an enrolled FP card
2.
Note: Please set the "hard Only option to No. If you set it to Yes, the ft n g er p r i
nt
lock will only verify users' PIN cards.
P\ace the same finger on the fingerprint sensor
(3)
again.
P\ace the same finger on the fingerprint sensor
(4)
for the third time.
The interface as shown in the fig use on the left is
displayed
Swi pe you I c6 d throng h the card reader until
(5)
the interface as shown in the fig ure on the left is
displayed
Now the FP card is en rolled successfully
Fingerprint Lock User Manual 26