Table of Contents
Advertisement
key. This key is used to manually decrease (when held this key will rapidly
decease dispayvaues)TheseTupvaue or naigaTe among menuoptioni
keydoubIesashenumberkey"3
Start key: This key can be used to start the fingerprint lock, press and hold this key for
Theesecondsonheini!iaIineJacetoopenthemenuoptions,hiskey
ahodoublesasheconfirmation(<OK>)key
Band switch: If you cannot access the menu options due to the loss of administrators
for some reason, proceed as follows: Press and hold the Menu key for
three seconds to display the administrator verification, and then turn
the Band switch at the back of the lock to the left or rig ht to open u p
the menu as a su per administrator
Connect key. Before remote unlock, press connect key to connect the device to the
remote control.
Prompt mouth of connection indicator: Duri ng connection, you can view the
Status indicator: low can awake the fingerprint lock in dormant state by pressing the
Start key. The preen LED indicator blinks when the fingerprint lock
operates properly and the red LED indicator is on for three seconds
if an error occurs. The g been LED indicator is on for three seconds
when an operation succeeds
OLED display: The black-and white OLED display features white graphics or text
against a black background.
Fingerprint sensor. You can only collect or match fingerprints by pressing your
finger(s) at the fingerprint sensor when the light in the
connection indicator through this prompt
mouth to check the connection status.
Fingerprint Lock User Manual 10
Advertisement
Table of Contents
