Table of Contents
Advertisement
in the form of "FP card + fingerprint", that is, swipe the FP card
before pressing the finger.
Create FPCard: This option is used to duplicate the enrolled fingerprints (stored in
the fingerprint lock) to the FP card. You can verify user identity
either through the "Fingerprint" or in the form of "FP card
fingerprint".
Empty F PCord: This option is used to purge all data (fingerprints and numbers)
stored in the FP card.
Notice:
(1?This function is only provided by fingerprint locks that su pport the Mifare card
function.
(2?1f no administrator is en rolled in the system, the system will prompt you to en roll
an administrator first
Create a PIN Card
I. Create a PIN Card
Every user will be assigned with an ID number for example 00001 after users are
enrolled in the fingerprint lock.
23 Fingerprint Lock User Manual
(7JSelect "User Manage"
PlNCard" from the main menu. The interface as
shown in the figure on the left is displayed
"FPCard Mng"
"Create
Advertisement
Table of Contents
