Table of Contents
Advertisement
NomaIOpen
If fingerprint or password verification is unsuccessful, the system will display a prompt
"Please press your finger again" or "Password error". The parameters "Illegal Cnt." and
"Illegal Alarm" are set by the administrator. The system will generate an alarm after
the illegal operations reach the specified value. For details, see
Notice: If the value of the parameter "Illegal Cnt." is la rger than 6, the s y s t e m w i l l a
utomatically power off if you fail to verify your fingerprint or password 6
consecutive
{irnes
FP Card Management
Select "F PCard Mng" from the "User Manage" interface as shown below:
FPCard Mng
Create PlNCard
Enroll FPCard
Create FPCard
Create PlNCard: This option is used to create an ID ca rd for a user who has already
instead of your fingerprint (only after the parameter "Card Only"
is set to "Yes". For details see
Enroll FPCard: This option is used to store an enrolled fingerprint directly in the FP
card instead of in the fingerprint lock. You can verify user identify
5. If you press Off, the interface as shown in the
fig ure on the left will be displayed, indicating
successful NO setting. In the meantime, the buzzer
will beep three consecutive times.
Empty FPCa d
3.1
Fingerprint Lock User Manual 22
3.1
Operation
Settings.
Operation
Settings)
Advertisement
Table of Contents
