Seaward PrimeTest Elite+ User Manual
Hide thumbs Also See for PrimeTest Elite+:
Table of Contents

Advertisement

PrimeTest Series
USER MANUAL
seaward.com
TESTED. TRUSTED... WORLDWIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PrimeTest Elite+ and is the answer not in the manual?

Questions and answers

Summary of Contents for Seaward PrimeTest Elite+

  • Page 1 PrimeTest Series USER MANUAL seaward.com TESTED. TRUSTED… WORLDWIDE...
  • Page 2: User Options / Pat Settings - Options

    SEAWARD Electronic Limited. This also applies to accompanying drawings and diagrams. Due to a policy of continuous development SEAWARD Electronic Limited reserves the right to alter the equipment specification and description outlined in this publication without prior notice and no part of this publication shall be deemed to be part of any contract for the equipment unless specifically referred to as an inclusion within such contract.
  • Page 3: Table Of Contents

    SEAWARD PRIMETEST SERIES USER MANUAL TABLE OF CONTENTS User Notes Safety Notes Using PrimeTest Elite+ Firmware on an Older PrimeTest Elite Instrument Accessories Standard PrimeTest Contents (What’s in the Box) Part Numbers Getting Started Getting to Know Your PrimeTest Before Using Your PrimeTest for the First Time...
  • Page 4 SEAWARD PRIMETEST SERIES USER MANUAL 8.11 Main Menu Window Page 2 – Upload 8.12 Main Menu Window Page 2 – Download 8.13 Main Menu Window Page 2 – Memory Options Downloading Your Primetest Downloading From Your PrimeTest Series to PATGuard 3 (AUS/NZ)
  • Page 5 SEAWARD PRIMETEST SERIES USER MANUAL Useful Information 16.1 Factory Set Test Sequences 16.2 Other Information Environmental Conditions Maintenance 18.1 Securing the PrimeTest 18.2 Cleaning the PrimeTest Series Service And Calibration. 19.1 Calibration Statement Online Resources TESTED. TRUSTED… WORLD WIDE Page 5 of 77...
  • Page 6: User Notes

    This symbol indicates that the operating instructions must be adhered to in order to avoid danger. Due to a policy of continuous development SEAWARD Electronic Limited reserves the right to alter the equipment specification and description outlined in this publication without prior notice and no part of this publication shall be deemed to be part of any contract for the equipment unless specifically referred to as an inclusion within such contract.
  • Page 7: Using Primetest Elite+ Firmware On An Older Primetest Elite Instrument

    The PrimeTest has been designed to make measurements in a dry environment. The PrimeTest includes a rechargeable battery pack which is charged while the PrimeTest Series is connected to a mains supply. Only a Seaward battery pack should be connected into the PrimeTest Series. Disconnect the PrimeTest Series from all leads before opening the battery compartment.
  • Page 8: Accessories

    SEAWARD PRIMETEST SERIES USER MANUAL 4 Accessories 4.1 Standard PrimeTest Contents (What’s in the Box) TESTED. TRUSTED… WORLD WIDE Page 8 of 77...
  • Page 9: Part Numbers

    SEAWARD PRIMETEST SERIES USER MANUAL 4.2 Part Numbers Instrument Only PrimeTest Elite+ 380A936 PrimeTest Pro 380A938 Instruments complete with kit PrimeTest Pro with PG3 AUS/NZ 1 YR and ruck sack 380A939 PrimeTest Pro with PG3 AUS/NZ 1 YR, Test n Tag Elite 2 AUS/NZ...
  • Page 10 SEAWARD PRIMETEST SERIES USER MANUAL PrimeTest Elite+ with PG3 AUS/NZ Outright, Test n Tag XL AUS/NZ printer, 2D scanner and ruck sack 380A944 PrimeTest Elite+ with PG3 AUS/NZ Outright, Test n Tag XL AUS/NZ printer, 2D scanner and hard case...
  • Page 11: Getting Started

    SEAWARD PRIMETEST SERIES USER MANUAL 5 Getting Started 5.1 Getting to Know Your PrimeTest Note: Only the PrimeTest Elite+ has the USB Flash Drive Port, Camera and Camera Flash features TESTED. TRUSTED… WORLD WIDE Page 11 of 77...
  • Page 12: Before Using Your Primetest For The First Time

    SEAWARD PRIMETEST SERIES USER MANUAL 5.2 Before Using Your PrimeTest for the First Time Before using your PrimeTest for the first time, please ensure that you fully charge the instrument using the black power lead plugged into the mains inlet.
  • Page 13: Primetest Battery Status Indication

    Relocate the battery compartment cover and fasten in position with the battery compartment screw. • Only use a replacement battery pack that has been supplied by Seaward or a Seaward approved distributor. TESTED. TRUSTED… WORLD WIDE...
  • Page 14: Getting To Know The User Interface

    SEAWARD PRIMETEST SERIES USER MANUAL 5.7 Getting To Know the User Interface Information bar - This area of the screen shows the Date, Time, Current User, Battery Status and connection Status. Test sequence table - This area is only displayed in test mode showing the tests within the selected test sequence.
  • Page 15: Set Up Using The Wizard

    SEAWARD PRIMETEST SERIES USER MANUAL 6 Set up using the Wizard The Wizard guides you through the setup process Note: Your existing settings can be changed or overwritten when using the wizard. The Wizard can be accessed from the Home Screen...
  • Page 16: User Options (Pat Settings, Primetest Elite+ And Primetest Pro)

    SEAWARD PRIMETEST SERIES USER MANUAL Once each section is complete enter and it returns you back to the wizard screen and enters in the relevant box. Once all six have been completed as above (F1) returns you to the home screen and (F5) will return you to the main area page 1.
  • Page 17: User Options / Pat Settings - Options

    SEAWARD PRIMETEST SERIES USER MANUAL The User Options or PAT Settings window consists of 4 pages and the function keys on these pages correspond to the following: Use F1 to return to the Home Screen, without saving. Use F3 to go to the next User Options / PAT Settings page.
  • Page 18 SEAWARD PRIMETEST SERIES USER MANUAL Restart Test Skip Test Restart Test Sequence Abort Test Sequence (Don’t Save Results) End Test Sequence (Save Results) Note: Restart Test is useful for coping with situations such as forgetting to connect the earth continuity probe.
  • Page 19: User Options / Pat Settings - Options Page 2

    SEAWARD PRIMETEST SERIES USER MANUAL This field can set to “Last” where the last reading taken during the measurement period is compared with the pass/fail limit or “Worst” where the highest reading taken during the measurement period is compared with the pass/fail limit.
  • Page 20: User Options / Pat Settings - Options Page 3

    SEAWARD PRIMETEST SERIES USER MANUAL Comments Line: Notes / Asset Description / Make / Model / Serial Number / Code / Asset Description (fixed) (Elite+ Only) / Notes (large field) (Elite+ Only) / RFID Data (Elite+ Only) This allows the field descriptor for each of the four comment lines (text lines) to be changed to show: Notes, Asset Description, Asset Group, Make, Model, Serial Number, Location, Code, Asset Description (fixed), Notes (large field) or RFID Data as required (note this also needs to be setup in PATGuard).
  • Page 21: User Options / Pat Settings - Options

    SEAWARD PRIMETEST SERIES USER MANUAL 7.4 User Options / PAT Settings - Options Page 4 Page 4 of the PAT Settings options allow unlock code to be entered for different download outputs. TESTED. TRUSTED… WORLD WIDE Page 21 of 77...
  • Page 22: Setting Up Your Primetest Series Instrument

    SEAWARD PRIMETEST SERIES USER MANUAL 8 Setting Up Your PrimeTest Series Instrument 8.1 Main Menu Navigation The Main Menu window can be accessed from the Home Screen by selecting (F4). There are 8 available options on the first screen, in the Main Menu window, for the PrimeTest Elite.
  • Page 23 SEAWARD PRIMETEST SERIES USER MANUAL The functions keys in the Main Menu windows correspond to the following: Use F1 to return to the Home Screen. Use F4 to accept / select a highlighted option (highlighted using the keyboard arrow keys).
  • Page 24: Main Menu Window - Time And Date Setup

    SEAWARD PRIMETEST SERIES USER MANUAL 8.2 Main Menu Window – Time and Date Setup By selecting Time Date (1), in the Main Menu, you can update the time and date stored on the PrimeTest. Use the Left / Right keyboard arrow keys to highlight the required parameter and then use the Up / Down keyboard keys to increase or decrease this, respectively.
  • Page 25 SEAWARD PRIMETEST SERIES USER MANUAL The functions keys in the Users window correspond to the following: Use F1 to return to the Home screen. Use this button (F2) to Select a new user. Select the User name, from the dropdown and enter the correct Password to change the current user of the tester.
  • Page 26 SEAWARD PRIMETEST SERIES USER MANUAL This is the New User button (F1 in User Privileges menu). A New User can be setup by adding a Username and Password and selecting Save (F3). The New User can then be selected in the Username field of the User Privileges screen.
  • Page 27 SEAWARD PRIMETEST SERIES USER MANUAL Differences in the workflow between Training Mode and Expert Mode Training Mode to turn on the PrimeTest Press F1 to enter the PAT Screen. Press F4 to enter PAT Auto Menu. Select the required test sequence from the...
  • Page 28 SEAWARD PRIMETEST SERIES USER MANUAL Follow the connection diagrams on the help screen. Pass or fail individual items or F4 to Pass All. The Electrical tests are now carried out. Complete the notes fields F4 to save and move on.
  • Page 29 SEAWARD PRIMETEST SERIES USER MANUAL F5 for menu or choose the tag and F4 to print it. TESTED. TRUSTED… WORLD WIDE Page 29 of 77...
  • Page 30 SEAWARD PRIMETEST SERIES USER MANUAL Expert Mode to turn on the PrimeTest, which starts at the auto test page. Select the required test sequence from the dropdown list. A) Class 1 Earthed 500 Vdc B) Class 1 Leakage 230 Vac...
  • Page 31 SEAWARD PRIMETEST SERIES USER MANUAL If Re-testing then an option to skip this screen is in PAT settings. Complete the notes fields F4 to save and move on. F5 for menu or choose the tag and F4 to print it TESTED.
  • Page 32: Main Menu Window - Connecting Bluetooth Devices

    SEAWARD PRIMETEST SERIES USER MANUAL 8.4 Main Menu Window - Connecting Bluetooth Devices Select this icon (3) to setup your Bluetooth accessories to work with the PrimeTest. The PrimeTest can be connected to Bluetooth accessories including bar code scanners, printers, smart phones and RFID scanners.
  • Page 33: How To Setup A Printer With Your Primetest

    SEAWARD PRIMETEST SERIES USER MANUAL 8.5 How to Setup a Printer with your PrimeTest Note: You will require PAT test data to be already stored on to the instrument and a printer to have been paired before you attempt the following steps.
  • Page 34 SEAWARD PRIMETEST SERIES USER MANUAL Above is an example of virtual label image showing the Seaward example pass logo example_logo_1.bmp. Alternative logos can be loaded and used. Alternative versions of the label can be selected using the function key Above is an example of a virtual label image showing a QR code. Again, alternative versions of the label can...
  • Page 35: Main Menu Window - Pat Settings

    SEAWARD PRIMETEST SERIES USER MANUAL 8.6 Main Menu Window – PAT Settings Please see section 6.1, 6.2, 6.3, 6.4 as this is another access point for the same menus 8.7 Main Menu Window - Automatic Test Sequence Editor (PAT Edit) Although the PrimeTest comes with a number of pre-defined Test Sequences (see section 17.1), you can...
  • Page 36 SEAWARD PRIMETEST SERIES USER MANUAL Select Add New using the keyboard arrow keys and the Accept button (F4). This will add a New Test Sequence to the bottom of the test sequence list. With the New Test Sequence highlighted press the menu button (F3) to open up the Test Sequence Options menu.
  • Page 37 SEAWARD PRIMETEST SERIES USER MANUAL Add Test function (F2). This will add a new test directly under the currently selected test. Delete Test function (F3). This will delete the highlighted test from the test sequence. Edit Test function (F4). This will edit the highlighted test.
  • Page 38: Main Menu Window -Check Box

    SEAWARD PRIMETEST SERIES USER MANUAL 8.8 Main Menu Window –Check Box Select Check Box 7 and the PrimeTest Elite+ will display the screen below to indicate how you should connect the tester and checkbox Once this has been done will start the test sequence and the...
  • Page 39: Main Menu Window -Null

    SEAWARD PRIMETEST SERIES USER MANUAL 8.9 Main Menu Window –Null You have three options as displayed below Option 1 is to null the resistance of the test lead when carrying out a class 1 test Option 2 is to null the resistance of both test leads when used in Point to Point testing...
  • Page 40: Main Menu Window (Page 2) - View Data

    SEAWARD PRIMETEST SERIES USER MANUAL 8.10 Main Menu Window (Page 2) - View Data By selecting View Data (1), in the Main Menu (Screen 2), you can view any data that you have saved in the PrimeTest by Site, Location or Asset ID.
  • Page 41 SEAWARD PRIMETEST SERIES USER MANUAL Select the filters you wish to apply, using the keyboard arrow keys on the keyboard, and use (F4) to accept or (F5) to cancel / return. Use F3 to sort the records by Site, Location or Asset ID and give a customised view. If the left or right keyboard arrow keys are selected, in this window, the display will jump up or down to the next page, respectively.
  • Page 42 SEAWARD PRIMETEST SERIES USER MANUAL Once in the asset / record you will be given a list of items under that record such as PAT results and JPEG images, depending on what results have been saved against that asset. Press (F4), again to open an item.
  • Page 43: Main Menu Window Page 2 - Upload

    SEAWARD PRIMETEST SERIES USER MANUAL Use F5 to return to the Main Menu. 8.11 Main Menu Window Page 2 – Upload Please see section 10. 8.12 Main Menu Window Page 2 – Download Please see section 9. TESTED. TRUSTED… WORLD WIDE...
  • Page 44: Main Menu Window Page 2 - Memory Options

    SEAWARD PRIMETEST SERIES USER MANUAL 8.13 Main Menu Window Page 2 – Memory Options Note: The Memory option can be used to reset factory settings / delete data or clear Bluetooth settings on the PrimeTest. In the Main Menu (Page 2) to access the Memory Usage window.
  • Page 45 SEAWARD PRIMETEST SERIES USER MANUAL The following delete / restore options are available; Set Default Settings reset factory User settings Restore Default Test Sequences resets factory Test Sequences Delete Bluetooth Favourites deletes the Bluetooth favourites Delete Test Results deletes tested results...
  • Page 46: Downloading Your Primetest

    SEAWARD PRIMETEST SERIES USER MANUAL 9 Downloading your PrimeTest The PrimeTest has the ability to download in the following formats: To PATGuard 3 creates a .gar file for use with PATGuard 3 Clone Data creates a backup file (.tar) with the current user setting For any other unlocked outputs please contact your distributor.
  • Page 47 SEAWARD PRIMETEST SERIES USER MANUAL You will be prompted to “Insert USB memory stick….” any data on this memory stick will be displayed in the bottom box (PrimeTest Elite+ only). You now have a choice of either downloading all data (F4) or to filter by selecting (F2).
  • Page 48: Downloading Clone Data From An Primetest Elite+ Or Primetest Pro

    SEAWARD PRIMETEST SERIES USER MANUAL Browse for the *.gar file on the flash memory stick. Select open, then OK and your downloaded data should appear in the PATGuard 3 (AUS/NZ) database (PrimeTest Elite+ only). 9.2 Downloading Clone Data from an PrimeTest Elite+ or PrimeTest Pro Note: Downloading Clone Data can be used to backup current user settings or to transfer to another PrimeTest.
  • Page 49: Uploading Your Primetest

    SEAWARD PRIMETEST SERIES USER MANUAL 10 Uploading your PrimeTest have the ability to Upload from the following: PrimeTest Elite+ From PATGuard 3(AUS/NZ) uploads a .gar file from PATGuard 3(AUS/NZ) Printer Logos uploads custom logo that can be used on the 75mm labels Clone Data uploads a backup file (.tar) with the current user setting...
  • Page 50: Uploading Printer Logos To A Primetest

    SEAWARD PRIMETEST SERIES USER MANUAL A message saying “SSS data uploaded OK” will be shown on the. Note: The uploaded data is displayed in a different location to the already tested data: From the Home Screen select Main Menu (F4), then select View Data...
  • Page 51: Uploading Clone Data To A Primetest

    SEAWARD PRIMETEST SERIES USER MANUAL To select the logo that was uploaded use the Tools function key (F2). Using the keyboard arrow keys, select either the Pass Logo: or Fail Logo: field, the uploaded logo should be available for selection. After highlighting the required logo, ensure you select the correct Printer and then save this setting by using Save (F3).
  • Page 52: Uploading List Configuration Data To A Primetest

    SEAWARD PRIMETEST SERIES USER MANUAL 10.5 Uploading List Configuration Data to a PrimeTest The PrimeTest will allow you to upload a text file containing an updated list of descriptions that can be selected by the instrument. The lists that can be updated are (note; in brackets are the names...
  • Page 53: Performing An Electrical Safety Test - Auto Mode

    SEAWARD PRIMETEST SERIES USER MANUAL From the Main Menu select Upload by using the keyboard arrow keys or selecting key number 7. In the Upload data into PrimeTest field select List Configuration Data, using the keyboard arrow keys to select from the dropdown menu.
  • Page 54 SEAWARD PRIMETEST SERIES USER MANUAL Use F1 to return to the Home Screen. Use F2 to setup the User Options / PAT Settings page, see section 7.3 User Options. Use F3 to enter the Manual PAT screen. Use F4 to enter the Automatic PAT screen.
  • Page 55: Auto Mode - Camera Function (Primetest Elite+ Only)

    SEAWARD PRIMETEST SERIES USER MANUAL Asset ID This is unique identifier for the Equipment Under Test (EUT). This can be entered using the keypad, a barcode scanner (see section 7.4 on Bluetooth Setup), QR code scanner Pro) or set to automatically increment (see section 7.6 (not available on the PrimeTest PAT Settings).
  • Page 56 SEAWARD PRIMETEST SERIES USER MANUAL This button (F3) will attach the picture and go back to the record. Note a smaller attach icon will be shown on the Auto Mode test window. To add another picture press the Camera button again.
  • Page 57: Auto Mode - The Visual Inspection

    SEAWARD PRIMETEST SERIES USER MANUAL 11.2 Auto Mode – The Visual Inspection In general, Auto-Portable Appliance Tests (PAT) will start with a Visual Inspection. Use F1 to Pass All parameters and move on to the next test in the Test Sequence and omits the next visual screen.
  • Page 58: Auto Mode - The Electrical Tests

    SEAWARD PRIMETEST SERIES USER MANUAL This is the Fail icon – use the keyboard arrow keys to highlight the parameter and F2 to Fail this part of the test. This is the Pass icon – use the keyboard arrow keys to highlight the parameter and F3 to Pass this part of the test.
  • Page 59: Performing An Electrical Safety Test - Manual Mode

    SEAWARD PRIMETEST SERIES USER MANUAL Should any test with the sequence fail the sequence will be aborted and you will presented with the Abort / Fail Options Menu, chose the required option and F4 confirms your selection. 12 Performing an Electrical Safety Test – Manual Mode The PrimeTest allows direct access to all of the electrical tests through the Manual Mode.
  • Page 60 SEAWARD PRIMETEST SERIES USER MANUAL Select the required test using either the number keys, the function keys or the arrow keys and use the Accept (F4) F2 selects the socket test that checks the supply socket. F3 selects the Checkbox test sequence...
  • Page 61: Test Functions

    SEAWARD PRIMETEST SERIES USER MANUAL 13 Test Functions See also section 16 for standard test sequences. 13.1 Earth Continuity Always ensure that the circuit under test is electrically isolated. Note that measurements can be adversely affected by parallel resistances of additional circuits or by transient currents.
  • Page 62: Selecting A Test Type

    SEAWARD PRIMETEST SERIES USER MANUAL Always ensure that you have selected the appropriate test type for the probe connections. 13.1.1 Selecting a Test Type In Manual PAT test mode, the Earth Continuity test can be switched between a Class I EUT continuity test...
  • Page 63: Insulation Resistance

    SEAWARD PRIMETEST SERIES USER MANUAL 13.2 Insulation Resistance Always ensure that the circuit under test is electrically isolated. Connecting a test probe to a hazardous voltage when a point to point measurement is active will result in that voltage being present on the other tests probes.
  • Page 64: Selecting A Test Type

    SEAWARD PRIMETEST SERIES USER MANUAL Always ensure that you have selected the correct test connection method in the test for the probe connections made. Ensure that the appliance mains switch is in the ON position. During this test, 250V or 500V D.C. is applied between the two connections points. The 500V D.C.
  • Page 65: Touch Current

    SEAWARD PRIMETEST SERIES USER MANUAL The test will continue until it times out. If we wish to abort the current test press the Stop button but a fail would be recorded if the full duration has not been completed. The measurement will be displayed in mA.
  • Page 66: Iec Lead / Polarity

    SEAWARD PRIMETEST SERIES USER MANUAL Once the correct connections have been made for the selected test type, press the Start button. The RCD will be powered and you will be prompted to reset the RCD. When you have reset the RCD the PrimeTest will count down and then perform the RCD test, the RCD trip time will be displayed.
  • Page 67: External Leakage Adaptors

    Reverse option is set to Off. The External Leakage Adaptor test function, on the PrimeTest, is intended to be used only in conjunction with the one of Seaward's External Leakage Adaptors. Note: The External Leakage Adaptor can perform an Earth Continuity and an External Leakage test to the Equipment Under Test (EUT).
  • Page 68: Socket Test

    SEAWARD PRIMETEST SERIES USER MANUAL Connect the Equipment Under Test (EUT) and Mains Supply to the External Leakage Adaptor. Note: That connecting both the EUT and mains supply to the External Leakage Adaptor will connect the Mains Supply to the EUT.
  • Page 69: Updating Via Pc

    SEAWARD PRIMETEST SERIES USER MANUAL , then press the ON Make sure the PrimeTest is switched off. Press and hold the function key button to power on the PrimeTest, keeping the key depressed until the updater screen is displayed. Device Updater Version: 3.7 14.1 Updating Via PC...
  • Page 70: Electrical Specification

    SEAWARD PRIMETEST SERIES USER MANUAL 15 Electrical Specification Earth Continuity (Rpe) Output Current (Load 2Ω): +/- 200mA DC with ZAP Test Voltage (o/c) : > 4VDC Display Range: 0.01Ω to 19.99Ω Measurement Range: 0.05Ω to 19.99Ω Resolution: 0.01Ω Operating Error:...
  • Page 71 SEAWARD PRIMETEST SERIES USER MANUAL Load Power/Current Test Voltage: Supply Voltage, maximum load current 16A Display Range: 0.00 - 16.00A (0.00kVA – 4.00kVA) Measurement Range: 0.50 - 16.00A (0.50kVA – 4.00kVA) Resolution: 0.01A Operating Error: +/-10% of reading +/- 5 digits...
  • Page 72: Useful Information

    SEAWARD PRIMETEST SERIES USER MANUAL 16 Useful Information 16.1 Factory Set Test Sequences Substitute Earth PE Conductor Visual Insulation Touch Current (Alternative) Wiring Trip Continuity Current Leakage Time Test Elite+ Limit Duration Limit Duration Limit Duration Limit Duration Limit Duration...
  • Page 73 SEAWARD PRIMETEST SERIES USER MANUAL Substitute Earth PE Conductor Visual Insulation Touch Current (Alternative) Wiring Trip Continuity Current Leakage Time Test Elite+ Limit Duration Limit Duration Limit Duration Limit Duration Limit Duration Limit Check Voltage Name (ms) (Ω) (MΩ) (mA)
  • Page 74: Other Information

    SEAWARD PRIMETEST SERIES USER MANUAL 16.2 Other Information Elite+ Parameter Default (max) (max) Earth Continuity Pass / Fail limit (Ω) 0.01 Earth Continuity Duration (s) Insulation Resistance Pass / Fail limit (MΩ) Insulation Resistance Duration (s) Substitute (Alternative) Leakage Pass / Fail limit (mA) 0.75...
  • Page 75: Environmental Conditions

    19 Service and Calibration. To maintain the specified accuracy of the measurement results, the instrument must be recalibrated at regular intervals by either the manufacturer or an authorised Seaward Service Agent. We recommend a recalibration period of one year. Should the PrimeTest become faulty please secure the instrument so that is can longer be used. Ship the PrimeTest back to a Seaward authorised dealer.
  • Page 76: Calibration Statement

    The PrimeTest is fully calibrated and found to be within the specified performance and accuracy at the time of production. The Seaward Group provides its products through a variety of channels; therefore it may be possible that the calibration date on the provided certificate may not represent the actual date of first use.
  • Page 77: Online Resources

    PRIMETEST SERIES USER MANUAL 20 Online Resources INFORMATION & MANUAL DOWNLOAD For more information about your Seaward PrimeTest and for downloadable version of the User Manual please go to www.seawardprimetest.com SOFTWARE DOWNLOAD To download the PrimeTest software supporting PATGuard 3 (AUS/NZ), www.seawardprimetest.com...

This manual is also suitable for:

Primetest proPrimetest series

Table of Contents