Mounting Kit - CDVI DGLIWLC Installation Manual

INSTALLATION MANUAL
DGLIWLC - DGLIFWLC
Proximity Card Readers - Wiegand Output
1] PRODUCTS OVERVIEW
Wiegand 26,30 or 44 bits.
Direct connection to the controller
or with the door controller (INTBUSW).
PCB sealed in epoxy.
Audible and visual feedback.
Stainless steel.
DGLIWLC (L x W x D): 103 x 81 x 23mm.
DGLIFNWLC (L x W x D): 139 x 41 x 23mm.
Technology: 125 kHz*.
Multi card protocol reader.
Input voltage: 12 Vdc.
Consumption: 100mA.
CE Certification
Certification FCC CFR 47
WEEE
part 15 compliance
IP53
-25°C to +60°C
2] RECOMMANDATIONS
Important
To protect the device from back-
emf do not forget to mount the
varistor on the lock in parallel.
These products, without back
plate, must be mounted on a non
flammable plate.
Recommended cables
4 twisted pairs 0.6 MM.

3] MOUNTING KIT

Varistor
DGLIWLC 1
DGLIFWLC
1
Environment
When in a humid area or close
to a sea shore, we recommend
applying a varnish on the termi-
nals to avoid oxidation.
® ®
Diax Diax screw
spanner stainless steel
1 2
1 2
DGLIWLC
Recommended power supplies
ADC335, ARD12 & BS60. These
products must be powered in
12Vdc and the power supply
should be
certified EN60950-1:2006/
A11:2009 standards and should
be designed to be a low power
supply source.
* Complies with European R&TTE directive 99/5/EC and
Brass
harmonised standards: ETS 301 489 and ETS 300-330-
1-Ed 2001. Complies with applicable EMC standards: EN
anchor
2
2
EN
DGLIFWLC
50133, EN 50130-4.
cdvi.com
7
cdvigroup.com