Mounting Kit - CDVI DGLIWLC Installation Manual

INSTALLATION MANUAL
DGLIWLC - DGLIFWLC
Proximity Card Readers - Wiegand Output
1] PRODUCTS OVERVIEW
Wiegand 26,30 or 44 bits.
Direct connection to the controller
or with the door controller (INTBUSW).
PCB sealed in epoxy.
Audible and visual feedback.
Stainless steel.
DGLIWLC (L x W x D): 103 x 81 x 23mm.
DGLIFNWLC (L x W x D): 139 x 41 x 23mm.
Technology: 125 kHz*.
Multi card protocol reader.
Input voltage: 12V dc.
Consumption: 100mA.
CE Certification
Certification FCC CFR 47
WEEE
part 15 compliance
IP53
-25°C to +60°C
2] RECOMMANDATIONS
Important
To protect the device from back-
emf do not forget to mount the
varistor on the lock in parallel.
These products, without back
plate, must be mounted on a non
flammable plate.
Recommended cables
4 twisted pairs 0.6 MM.

3] MOUNTING KIT

Varistor
DGLIWLC 1
DGLIFWLC 1
cdvi.com
2
cdvigroup.com
Optional
Single gang box mounting plate
for the DGLPFNWLC reader
(Ref: MPLATE).
Environment
When in a humid area or close
to a sea shore, we recommend
applying a varnish on the termi-
nals to avoid oxidation.
® ®
Diax Diax screw
spanner stainless steel
1 2
1 2
DGLIWLC
Recommended power supplies
ARD12 & BS60. These products
must be powered in 12Vdc and
the power supply should be
certified EN60950-1:2006/
A11:2009 standards and should
be designed to be a low power
supply source.
Brass
anchor
2
2
* Complies with European R&TTE directive 99/5/EC and harmonised
standards: ETS 301 489 and ETS 300-330-1-Ed 2001. Complies with
applicable EMC standards: EN 50133, EN 50130-4.
EN
DGLIFWLC