Remove The Door Handle; Removing The Appliance Door - Miele FN 22062 ws Operating And Installation Instructions

Remove the door handle

 Open the appliance door.
 Pull door handle . The sidebar 
will then slide back.
 Pull sidebar  firmly to the back out
of the guides on the mounting plate.
 Now loosen the four screws (TX15) in
the mounting plate and remove the
handle.
 Remove the cover caps from the op-
posite side, and fit them into the
empty holes.

Removing the appliance door


Danger of injury when removing
the upper door.
The appliance door is not secure
once the hinge pin has been re-
moved.
The appliance door must be held by
a second person.
 Carefully tip the appliance back with
the help of a second person, and un-
screw the safety screw  from the
right-hand lower hinge plate .
 Open the appliance door.
 Hold the appliance door on the
handle side and at the bottom, and
carefully lift it off. Hinge pin  with
washer  will be released from hinge
plate .
If it does not release itself:
 Press hinge pin  together with
washer  out of the hinge plate from
underneath.
Installation
51