Switching On And Off; Switching Off For Longer Periods Of Time - Miele FN 22062 ws Operating And Installation Instructions

Switching on and off

Switching on
To enable the temperature to get suffi-
ciently cold inside the appliance, allow
the appliance to run for approx.
2 hours before placing food in it.
Do not place food in the freezer until it
has reached the required coldness (at
least -18 °C).
 Press the  button.
The appliance will start to cool and the
temperature required will appear in the
temperature display. The temperature
display and the alarm symbol  will
flash at the same time until the required
temperature is reached.
Switching off the refrigeration
appliance
 Press the  button until the display
goes out.
If this does not work, the safety lock
is activated (see "Selecting further
settings – Activating and deactivating
the safety lock").
The cooling system will be switched off.
20
Switching off for longer peri-
ods of time
If, during a long absence, the refri-
geration appliance is switched off
but not cleaned and the door(s) left
shut, there is a risk of mould forming
inside the appliance.
It is essential to clean the refrigera-
tion appliance.
If the refrigeration appliance is not go-
ing to be used for a longer period of
time, observe the following:
 Switch the refrigeration appliance off.
 Switch off at the wall socket and
withdraw the plug from the socket, or
disconnect the fuse.
 Clean the refrigeration appliance and
leave the door ajar to air the appli-
ance and avoid odours building up in-
side.