Installation; Side-By-Side Installation; Location - Miele FN 22062 ws Operating And Installation Instructions

Installation

Installation

Fire risk and danger of damage
from appliances which give off heat.
Appliances which give off heat can
catch fire and set fire to the refrigera-
tion appliance.
Do not place appliances which give
off heat, such as mini-ovens, double
burner hobs or toasters on the refri-
geration appliance.

Fire risk and danger of damage
from open flames.
Open flames can set fire to the refri-
geration appliance.
Keep open flames (e.g. a candle)
away from the refrigeration appli-
ance.

Side-by-side installation


Risk of damage due to corrosion
on external appliance panels.
In environments with high humidity,
condensation can build up on ex-
ternal appliance panels, which can
cause corrosion.
Do not place different refrigeration
appliance models directly next to
one another.
Your refrigeration appliance must not be
installed "side-by-side" because it is
not equipped with built-in heating units
in the side panels.
If you want to place several refrigeration
appliances next to each other, a dis-
tance of 100 mm must be maintained
between them.
44
Please contact your dealer for specific
information about which combinations
will work with your appliance.

Location

This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your re-
frigeration appliance please bear in
mind that it will use more energy if in-
stalled near to a heater, a cooker or
other appliance that gives off heat. Dir-
ect sunlight should also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.
When installing the appliance, please
note:
– The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
– The plug and cable must not touch
the rear of the appliance as they
could be damaged by vibrations from
the appliance.
– Do not plug in other appliances be-
hind this appliance.