Changing the door hinging
Fit the appliance door from below up
onto the upper hinge pin and then
close the door.
Fit hinge bracket from below into
the lower door bearing and screw it
on tight.
The appliance door can be aligned
using the long slots in the hinge
bracket. Make sure you have
tightened all screws up properly!
50
Changing over the door handle
Carefully remove cover and stop-
pers from the sides.
Slide cover over to the left and
then insert a suitable plastic or
wooden tool into the gap on the
right hand side.
Carefully lever cover off.
Be careful not to let the tool slip
out and damage the appliance sur-
face.