Led Indicators - HMS Networks Anybus Communicator CAN IIoT Startup Manual

Installation
2.4

LED Indicators

LED
1 - Network Status
2 - Module Status
3 - Link/Activity 1
4 - Link/Activity 2
5 - CAN Status
6 - Device Status
The Link/Activity LED indicators will show a red light for 10 Mbit/s connections. This is
normal and does not indicate an error.
Anybus ® Communicator ™
LED 1 to 4
LED 5
LED 6
Indication
Off
Green
Green, flashing
Red
Alternating Red/Green
Off
Green
Red
Alternating red/green
Off
Green
Green, flickering
Red
Red, flickering
Off
Green
Red. flashing
Red
Off
Green
Green, flashing
Red
Alternating red/green
CAN Startup Guide
IIoT interface status
CAN status
Device status
Meaning
Offline or no power
Online, IP address assigned
No IP address or no link
Fatal error, IP address conflict
Firmware update in progress
No power or IP address conflict
Normal operation
Fatal error
Firmware update in progress
Link not detected or no power
Link established (100 Mbit/s)
Link activity (100 Mbit/s)
Link established (10 Mbit/s)
Link activity (10 Mbit/s)
No power or no CAN communication
Running, no errors or timeout
Transaction error, timeout, or CAN subnet
stopped
Fatal error
No power or initializing
Running
Idle
Fatal error
Configuration error
9 (12)
SP2445 1.0