Din Rail Mounting - HMS Networks Anybus Communicator CAN IIoT Startup Manual

Installation
2.2

DIN Rail Mounting

Mount on DIN rail
1. Hook the unit onto
the upper lip of the
rail and push gently
downwards.
2. Push the unit
towards the rail
until it snaps into
place.
Remove from DIN rail
1. Push the unit gently downwards on the rail.
2. Pull the bottom end of the unit free of the rail and remove it.
Anybus ® Communicator ™
The unit must be electrically grounded through the DIN rail for EMC compliance.
Fig. 1
CAN Startup Guide
Push down to mount or remove
5 (12)
SP2445 1.0