Installation
2
Installation
2.1
Installation Overview
Prerequisites
The following items are required for installation and basic configuration:
•
USB type B cable
•
CAN cable
•
Ethernet cable
•
Anybus Configuration Manager - Communicator CAN
•
Anybus Configuration Manager - IIoT
•
IPconfig (3.2.1.1 or later)
The Anybus Configuration Manager and IPconfig applications can be downloaded from
www.anybus.com/support.
Basic installation steps
1.
Download and install the required configuration software on a PC (see Prerequisites)
2.
Mount the Anybus Communicator on the DIN rail.
3.
Connect the CAN and IIoT network interfaces.
4.
Connect the USB cable between the gateway and the PC.
5.
Connect the power cable and apply power.
6.
Check the LED indicators to verify that the gateway is running and that the serial
and IT networks are connected. See
7.
Use Anybus Configuration Manager - Communicator CAN to set up the data
exchange configuration in the Anybus Communicator.
8.
Use IPconfig to configure the TCP/IP settings for the Anybus Communicator.
9.
Use Anybus Configuration Manager - IIoT to create a tag configuration and transfer
it to the Anybus Communicator IIoT interface.
10. Connect to the web interface of the Anybus Communicator and configure
MQTT/OPC UA communication.
Anybus
®
Communicator
™
CAN Startup Guide
LED Indicators, p.
9.
4 (12)
SP2445 1.0