Related Manuals for HMS Networks Anybus Communicator CAN IIoT
Summary of Contents for HMS Networks Anybus Communicator CAN IIoT
- Page 1 A A n n y y b b u u s s ® ® C C o o m m m m u u n n i i c c a a t t o o r r ™ ™ C C A A N N I I I I o o T T STARTUP GUIDE...
-
Page 2: Important User Information
Important User Information Liability Every care has been taken in the preparation of this document. Please inform HMS Industrial Networks AB of any inaccuracies or omissions. The data and illustrations found in this document are not binding. We, HMS Industrial Networks AB, reserve the right to modify our products in line with our policy of continuous product development. -
Page 3: About This Document
Preface 3 (12) Preface About This Document This document describes how to install the Anybus Communicator CAN IIoT. For additional documentation and software downloads, FAQs, troubleshooting guides and technical support, please visit www.anybus.com/support. Document Conventions The following formatting conventions are used in this document to indicate safety... -
Page 4: Installation Overview
Installation 4 (12) Installation Installation Overview Prerequisites The following items are required for installation and basic configuration: • USB type B cable • CAN cable • Ethernet cable • Anybus Configuration Manager - Communicator CAN • Anybus Configuration Manager - IIoT •... -
Page 5: Din Rail Mounting
Installation 5 (12) DIN Rail Mounting The unit must be electrically grounded through the DIN rail for EMC compliance. Mount on DIN rail Hook the unit onto the upper lip of the rail and push gently downwards. Push the unit towards the rail until it snaps into place. - Page 6 Installation 6 (12) Connectors and Indicators 2.3.1 External Parts Fig. 2 Overview LED indicators DIN rail mount Power connector CAN connector USB connector IIoT network interface SP2445 1.0 Anybus ® Communicator ™ CAN Startup Guide...
- Page 7 Installation 7 (12) 2.3.2 Power Connector (2 pin) Connecting power with reverse polarity or using the wrong type of power supply may damage the equipment. Make sure that the power supply is connected correctly and of the recommended type. Signal +24 VDC Power Ground 2.3.3...
-
Page 8: Ethernet Connector (Rj45)
Installation 8 (12) 2.3.4 Ethernet Connector (RJ45) Signal Description Transmit data + Transmit data - Receive data + Receive data - 4,5,7,8 (reserved) 2.3.5 CAN Interface (DE-9M) Signal Description CAN_L CAN low CAN_GND CAN ground Shield Cable shield CAN_GND CAN ground CAN_H CAN high 1, 4, 8, 9... -
Page 9: Led Indicators
Installation 9 (12) LED Indicators LED 1 to 4 IIoT interface status LED 5 CAN status LED 6 Device status Indication Meaning Offline or no power Green Online, IP address assigned Green, flashing No IP address or no link 1 - Network Status Fatal error, IP address conflict Firmware update in progress Alternating Red/Green... -
Page 10: Technical Data
Technical Data 10 (12) Technical Data General Specifications Model name Anybus Communicator CAN IIoT Order code AB7330 120 x 75 x 27 mm Dimensions (L x W x H) 150 g Weight Operating temperature -25 to +55 °C (IEC 60068-2-1 and IEC 60068-2-2) Storage temperature -40 to +85 °C (IEC 60068-2-1 and IEC 60068-2-2) - Page 11 Technical Data 11 (12) IIoT Interface OPC UA functionality • Support for micro-embedded profile • Supports Discovery Services • Timestamp supported via discovery server • User name and password authentication • Supports DataChange Subscription • Maximum 80 data point tags (max.
- Page 12 last page © 2019 HMS Industrial Networks Box 4126 300 04 Halmstad, Sweden info@hms.se SP2445 1.0 en-US / 2019-02-13 / 11688...