Rear Panel Connections - ZyXEL Communications ES-116S User Manual

2 Set the ES-116S on a smooth, leveled and sturdy flat
space strong enough to support the weight of the ES-
116S and the connected cables. Make sure there is a
power outlet nearby.

3 Rear Panel Connections

The RJ-45 ports and the power port are located on the
rear panel.
3.1 RJ-45 Auto-negotiating Ports
The 10Base-T/100Base-TX RJ-45 ports are auto-
negotiating and auto-crossover.
An auto-negotiating port can detect and adjust to the
optimum Ethernet speed (10/100Mpbs) and duplex mode
(full duplex or half duplex) of the connected device.
An auto-crossover (auto-MDI/MDI-X) port automatically
works with a straight-through or crossover Ethernet cable.
Do NOT block the ventilation holes.
ENGLISH
2