Mechanical Parts And Disassembly; Disassembly Of The Cases - Icom IC-H6 Service Manual

SECTION 6 MECHANICAL PARTS AND DISASSEMBLY
6 - 1 DISASSEMBLY OF THE CASES
1. Turn the power switch off and remove the power pack.
2. Remove two screws (('.) on the rear panel and four screws on the bottom as shown in the figure.
®
3. Remove the front panel as shown in the figure. At this time, be
sure not to damage the engaged parts at the top (circled with
dotted lines).
open the bottom slightly and slide the front panel down-
wards.
4. Slide the PTT Button upward, and then remove the rear panel.
J
6-1