Table of Contents
Advertisement
You can strap the Mini Driver MPI to be either
constantly on, or to be controlled by the Request to
Send signal. Operation with controlled carrier
enables the connection of the Mini Driver MPI in a
multipoint configuration (see Figure 1). You can also
use controlled carrier in applications requiring the
passing of a control signal end-to-end—the RTS one
one Mini Driver MPI is passed to the DCD on the
other unit.
Building A:
MIS DEPT.
Async Host
Figure 1. Mini Driver MPI In A Multipoint Application
The Mini Driver MPI features a switch selectable
DTE/DCE option. The unit can operate as a DTE
in order to connect to another DCE, such as a
multiplexer port, without the use of cross cable.
You can operate the Mini Driver MPI without
OFFICE COMPLEX
Mini
Driver
MPI
4-Wire Unshielded
twisted-pair cable
Up to seven
drops
MINI DRIVER MPI
Building B:
ACCT. DEPT
Async Terminals
5
Advertisement
Table of Contents
