Black Box MDS921AE-10BTS-R2 User Manual
  1. Manuals
  2. Brands
  3. Black Box Manuals
  4. Modem
  5. MDS921AE-10BTS-R2
  6. User manual
Black Box MDS921AE-10BTS-R2 User Manual

Black Box MDS921AE-10BTS-R2 User Manual

Atm based g.shdsl modem, bridge and router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
UM_MDS921AE-10BTS-R2-SMARTLINK_UM_MDS921AE
MDS921AE-10BTS-R2
MDS921AE
SMARTLINK
SMARTLINK
MDS957AE-10BTS-R2
MDS957AE
SMARTLINK II
SMARTLINK II
ATM Based G.SHDSL Modem, Bridge and Router
ATM Based G.SHDSL Modem
USER MANUAL
Version
Revision
Document name
UM_MDS921AE-MDS957AE-10BTS-R2-SMARTLINK_v1-4-081019v1-2-070301.doc
User Manual
Version 1.4
Version 1.
19. October 2008
19. October 2008
UM_MDS921AE-MDS957AE-10BTS-R2-SMARTLINK_v1
UM_MDS921AE
R2
R2
SMARTLINK_v1-4-081019.doc

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MDS921AE-10BTS-R2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Black Box MDS921AE-10BTS-R2

Summary of Contents for Black Box MDS921AE-10BTS-R2

  • Page 1 UM_MDS921AE-10BTS-R2-SMARTLINK_UM_MDS921AE UM_MDS921AE-MDS957AE-10BTS-R2-SMARTLINK_v1-4-081019v1-2-070301.doc User Manual MDS921AE MDS921AE-10BTS-R2 SMARTLINK SMARTLINK MDS957AE MDS957AE-10BTS-R2 SMARTLINK II SMARTLINK II ATM Based G.SHDSL Modem ATM Based G.SHDSL Modem, Bridge and Router USER MANUAL Version Version 1. Version 1.4 Revision 19. October 2008 19. October 2008 Document name...
  • Page 2 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual © Copyright © 2008 by BlackBox BlackBox. The contents of this publication may not be reproduced in any . The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated part or as a whole, transcribed, stored in a retrieval system, translated into any language, or into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical,...

  • Page 3: Version Control

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Version Control User Manual Date Major changes to previous version Version 17.01.2005 17.01.2005 Initial version 14.11.2005 14.11.2005 Included EN50419 28.09.2006 28.09.2006 Housing and Design Changes 05.12.2007 05.12.2007 G.SHDSL.bis added 19.03.2008 19.03.2008 Multi-Pair and Multi-Link modes added added EU Directive 2002/96/EC and EN50419 EU Directive 2002/96/EC and EN50419...

  • Page 4: Table Of Contents

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Table of Contents Version Control ............................3 Description ............................6 Features ....................................6 Specification ..................................7 Model Overview ..................................9 Applications ..........................
  • Page 5 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Advanced Setup. SHDSL.bis router Advanced Setup. SHDSL.bis router ..............38 WAN..................................... 41 Bridge ....................................43 VLAN ....................................45 NAT/DMZ ..................................... 51 Virtual Server ..........................

  • Page 6: Description

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Description The BlackBox modem family includes ATM G.shdsl or G.shdsl.bis routers especially designed to modem family includes ATM G.shdsl or G.shdsl.bis routers especially designed to modem family includes ATM G.shdsl or G.shdsl.bis routers especially designed to be Ethernet Extenders for LAN be Ethernet Extenders for LAN-to-LAN and ISP-to-LAN applications.

  • Page 7: Specification

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Specification Routing Support IP/TCP/UDP/ARP/ICMP/IGMP protocols Support IP/TCP/UDP/ARP/ICMP/IGMP protocols • IP routing with static routing and RIPv1/RIPv2 (RFC1058/2453) IP routing with static routing and RIPv1/RIPv2 (RFC1058/2453) • IP multicast and IGMP proxy (RFC1112/2236) IP multicast and IGMP proxy (RFC1112/2236) •...
  • Page 8 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual WAN Interface SHDSL: ITU-T G.991.2 (Annex A, Annex B) (SHDSL router) T G.991.2 (Annex A, Annex B) (SHDSL router) • SHDSL.bis: ITU-T G.991.2 (2004) Annex A/B/F/G (SHDSL.bis router) T G.991.2 (2004) Annex A/B/F/G (SHDSL.bis router) T G.991.2 (2004) Annex A/B/F/G (SHDSL.bis router) •...

  • Page 9: Model Overview

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Model Overview Smartlink_SHDSL Overview DESKTOP (Smartlink I & II), Ethernet Bridge Router, VLAN DESKTOP (Smartlink I & II), Ethernet Bridge Router, VLAN MDS921AE-10BTS MDS957AE-10BTS Page 9 of 113...

  • Page 10: Applications

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Applications Application with DSLAM Application with DSLAM Application with DSLAM, ISP Application with DSLAM, ISP-to-LAN Ethernet Extension Point-to-Point Application, LAN Point Application, LAN-to-LAN Ethernet Extension Main Link Ethernet Ethernet Standby Link LAN-to-LAN Ethernet Extension with Link Protection LAN Ethernet Extension with Link Protection -PAM TC-PAM...

  • Page 11: Firewall

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Firewall A firewall protects networked computers from intentional hostile intrusion that could compromise A firewall protects networked computers from intentional hostile intrusion that could compromise A firewall protects networked computers from intentional hostile intrusion that could compromise confidentiality or result in data corruption or denial of service.
  • Page 12 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Denial of Service Attack Attack Denial of service (DoS) attacks typically come in two flavors: resource starvation and resource Denial of service (DoS) attacks typically come in two flavors: resource starvation and resource Denial of service (DoS) attacks typically come in two flavors: resource starvation and resource overload.

  • Page 13: Vlan (Virtual Local Area Network) Vlan (Virtual Local Area Network)

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual VLAN (Virtual Local Area Network) VLAN (Virtual Local Area Network) Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so that they can communicate as if they were attached to the same wire, when in fact that they can communicate as if they were attached to the same wire, when in fact...
  • Page 14 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual VID that is included in the tag header. The presence of the tag header carrying a non uded in the tag header. The presence of the tag header carrying a non uded in the tag header. The presence of the tag header carrying a non-null VID means that some other device, either the originator of the frame or a VLAN means that some other device, either the originator of the frame or a VLAN means that some other device, either the originator of the frame or a VLAN-aware bridge, has...
  • Page 15 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Page 15 of 113...

  • Page 16: Getting To Know About The Router Getting To Know About The Router

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Getting to know about the router Getting to know about the router This section will introduce the the hardware of the router. Front Panel of four Front Panel of four-port router The front panel contains LEDs which show the status of the The front panel contains LEDs which show the status of the router.

  • Page 17: Rear Panel

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Rear Panel The rear panel of SHDSL router is where all of the connections are made. The rear panel of SHDSL router is where all of the connections are made. 9 VDC 4- Port Switch MONITOR xDSL...

  • Page 18: Pinout

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Pinout Console Port DB9 pinout: Pin Number Description Figure Figure No connection RxD (O) TxD (I) No connection No connection CTS (O) RTS (I) No connection SHDSL RJ45 pinout: Pin Number Description Figure Figure No connection...

  • Page 19: Configuration To The Router Configuration To The Router

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Configuration to the router Configuration to the router This guide is designed to lead users through Web Configuration of G.shdsl Router in the easiest This guide is designed to lead users through Web Configuration of G.shdsl Router in the easiest This guide is designed to lead users through Web Configuration of G.shdsl Router in the easiest and quickest way possible.

  • Page 20: Configuration Via Web Browser Configuration Via Web Browser

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Configuration via Web Browser Configuration via Web Browser Using Microsoft Windows 2000 and XP: click the Using Microsoft Windows 2000 and XP: click the start button. Select setting setting and control panel. Double click the network icon.
  • Page 21 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual In the Configuration window, select the In the Configuration window, select the TCP/IP protocol line that has been associated with your protocol line that has been associated with your network card and then click property property icon.
  • Page 22 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual After rebooting your PC, open IE or Netscape Browser to connect the Router. Type After rebooting your PC, open IE or Netscape Browser to connect the Router. Type After rebooting your PC, open IE or Netscape Browser to connect the Router. Type http://192.168.0.1 The default IP address and sub net IP address and sub net-mask of the...

  • Page 23: Basic Setup

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Basic Setup The Basic Setup contains LAN, WAN, Bridge and Route operation mode. User can use it to Setup contains LAN, WAN, Bridge and Route operation mode. User can use it to Setup contains LAN, WAN, Bridge and Route operation mode.

  • Page 24: Bridge Mode

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Bridge Mode Before configuration the router in bridge mode Before configuration the router in bridge mode check with your ISP about these information. check with your ISP about these information. VPI: VCI: Encapsulation: Gateway: Host Name:...
  • Page 25 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual The screen will prompt the new configured parameters. Check the parameters and The screen will prompt the new configured parameters. Check the parameters and The screen will prompt the new configured parameters. Check the parameters and Click Restart The router will reboot with the new setting or The router will reboot with the new setting or Continue to configure another parameters.

  • Page 26: Routing Mode

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Routing Mode Routing mode contains DHCP server, DHCP client, DHCP Routing mode contains DHCP server, DHCP client, DHCP relay, Point-to-Point Protocol over ATM Point Protocol over ATM and Ethernet and IP over ATM and Ethernet over ATM. You have to clarify which Internet protocol and Ethernet and IP over ATM and Ethernet over ATM.
  • Page 27 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual For example: If the LAN IP address is 192.168.0.1, the IP range of LAN is 192.168.0.2 to For example: If the LAN IP address is 192.168.0.1, the IP range of LAN is 192.168.0.2 to For example: If the LAN IP address is 192.168.0.1, the IP range of LAN is 192.168.0.2 to 192.168.0.51.

  • Page 28: Dhcp Client

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual You may assign fixed IP addresses to some devices while using DHCP, provided that the fixed IP You may assign fixed IP addresses to some devices while using DHCP, provided that the fixed IP You may assign fixed IP addresses to some devices while using DHCP, provided that the fixed IP address are not within the range used by the DHCP server.
  • Page 29 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Enter DHCP server IP address i Enter DHCP server IP address in IP address field. Press Next Page 29 of 113...

  • Page 30: Pppoe Or Pppoa

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual PPPoE or PPPoA PPPoA (point-to-point protocol over ATM) and PPPoE (point point protocol over ATM) and PPPoE (point-to-point protocol over Ethernet) are point protocol over Ethernet) are authentication and connection protocols used by many service providers for broadband Internet authentication and connection protocols used by many service providers for broadband Internet authentication and connection protocols used by many service providers for broadband Internet access.
  • Page 31 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Type the ISP1 parameters. Username: test Password: test Password Confirm: test Your ISP will provide the user name and password. Your ISP will provide the user name and password. Idle Time: 10 You want your Internet connection to remain on at all time, enter 0 in the Idle Time field.

  • Page 32: Ipoa Or Eoa

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual IPoA or EoA Before your configure the router, check the router, check the information below with your ISP. VPI: VCI: Encapsulation: IP Address: Subnet Mask: Gateway: DNS Server: Host Name: (if applicable licable) Type the Wan Parameters;...
  • Page 33 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual The screen will prompt the parameters that will be written in EPROM. Check the parameters before The screen will prompt the parameters that will be written in EPROM. Check the parameters before The screen will prompt the parameters that will be written in EPROM.
  • Page 34 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Press Restart to restart the router working with new parameters or press continue to setup another Press Restart to restart the router working with new parameters or press continue to setup another Press Restart to restart the router working with new parameters or press continue to setup another parameter.

  • Page 35: Advanced Setup Shdsl Router Advanced Setup Shdsl Router

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Advanced Setup SHDSL router Advanced Setup SHDSL router Advanced Setup SHDSL router Advanced setup contains SHDSL, WAN, Bridge, Route, NAT/DMZ, Virtual server and firewall Advanced setup contains SHDSL, WAN, Bridge, Route, NAT/DMZ, Virtual server and firewall Advanced setup contains SHDSL, WAN, Bridge, Route, NAT/DMZ, Virtual server and firewall parameters.
  • Page 36 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual have to setup n=0. The router will adapt the data rate according to the line status. have to setup n=0. The router will adapt the data rate according to the line status. have to setup n=0.
  • Page 37 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual SNR margin is an index of line connection. You can see the actual SNR margin in STATUS SHDSL. SNR margin is an index of line connection. You can see the actual SNR margin in STATUS SHDSL. SNR margin is an index of line connection.

  • Page 38: Advanced Setup. Shdsl.bis Router Advanced Setup. Shdsl.bis Router

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Advanced Setup. SHDSL.bis router Advanced Setup. SHDSL.bis router Advanced Setup. SHDSL.bis router You can setup the Annex type, data rate and SNR margin for SHDSL.bis parameters in You can setup the Annex type, data rate and SNR margin for SHDSL.bis parameters in You can setup the Annex type, data rate and SNR margin for SHDSL.bis parameters in SHDSL.bis.
  • Page 39 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual For single-pair mode Data Rate (2W): you can setup the SHDSL.bis data rate in the multiple of 64kbps. Data Rate (2W): you can setup the SHDSL.bis data rate in the multiple of 64kbps. Data Rate (2W): you can setup the SHDSL.bis data rate in the multiple of 64kbps.
  • Page 40 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual For two-pair mode Link Type. Please select the desired operation mode of the router. operation mode of the router. 2-Wire: 2-wire mode, second pair is d wire mode, second pair is disabled M-Pair 4-wire mode.

  • Page 41: Wan

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual The SHDSL or SHDSL.bis router supports up to 8 PVCs. WAN 1 was configured via BASIC except The SHDSL or SHDSL.bis router supports up to 8 PVCs. WAN 1 was configured via BASIC except The SHDSL or SHDSL.bis router supports up to 8 PVCs.
  • Page 42 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual The screen will prompt the parameters that will be written in EPROM. Check the parameters before The screen will prompt the parameters that will be written in EPROM. Check the parameters before The screen will prompt the parameters that will be written in EPROM.

  • Page 43: Bridge

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Bridge If your router is setup in bridge mode and you want to setup advanced filter function, you can use If your router is setup in bridge mode and you want to setup advanced filter function, you can use If your router is setup in bridge mode and you want to setup advanced filter function, you can use BRIDGE menu to setup the filter function, blocking function.
  • Page 44 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Press Restart to restart the router working with new parameters or press to restart the router working with new parameters or press continue continue to setup another parameter. Page 44 of 113...

  • Page 45: Vlan

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual VLAN Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so that they can communicate as if they were attached to the same wire, when in fact they are located that they can communicate as if they were attached to the same wire, when in fact they are located...
  • Page 46 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual When the product works under routing mode, the Link Type of WAN will be Access mode, the product works under routing mode, the Link Type of WAN will be Access mode, the product works under routing mode, the Link Type of WAN will be Access mode, un-tagged port.
  • Page 47 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Route If the Router is connected to more than one network, If the Router is connected to more than one network, it may be necessary to set up a static route it may be necessary to set up a static route between them.
  • Page 48 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual RIP Mode: this parameter determines how the product handle RIP Mode: this parameter determines how the product handle RIP (Routing information protocol). RIP (Routing information protocol). RIP allows it to exchange routing information with other router. If set to Disable, the gateway does RIP allows it to exchange routing information with other router.
  • Page 49 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual RIP Version: It determines the format an RIP Version: It determines the format and broadcasting method of any RIP transmissions by the d broadcasting method of any RIP transmissions by the gateway. RIP v1: it only sends RIP v1 messages only.
  • Page 50 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Authentication required. None: for RIP, there is no need of authentication None: for RIP, there is no need of authentication code. Password: the RIP is protected by password, authentication code. Password: the RIP is protected by password, authentication code. MD5: The RIP will be decoded by MD5 than protected by password, authentication code.

  • Page 51: Nat/Dmz

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual NAT/DMZ NAT (Network Address Translation) is the translation of an Internet Protocol address NAT (Network Address Translation) is the translation of an Internet Protocol address NAT (Network Address Translation) is the translation of an Internet Protocol address (IP address) used within one network to a different IP address known within another network.
  • Page 52 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual If you want to enable the NAT/DMZ functions, click Enable. Enable the DMZ host Function is used If you want to enable the NAT/DMZ functions, click Enable. Enable the DMZ host Function is used If you want to enable the NAT/DMZ functions, click Enable.
  • Page 53 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Multi-NAT: Some of the virtual IP a NAT: Some of the virtual IP addresses (eg: 192.168.0.10 ~ 192.168.0.50) collectively use two ddresses (eg: 192.168.0.10 ~ 192.168.0.50) collectively use two of the global IP addresses (eg: 69.210.1.9 and 69.210.1.10). The Multi of the global IP addresses (eg: 69.210.1.9 and 69.210.1.10).

  • Page 54: Virtual Server

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Virtual Server For example: Specific ports on the WAN interface are re For example: Specific ports on the WAN interface are re-mapped to services inside the LAN. As mapped to services inside the LAN. As only 69.210.1.8 (e.g., assigned to WAN from ISP) is visible to the Internet, but does not actually only 69.210.1.8 (e.g., assigned to WAN from ISP) is visible to the Internet, but does not actually only 69.210.1.8 (e.g., assigned to WAN from ISP) is visible to the Internet, but does not actually...
  • Page 55 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Type the necessary parameters then click Type the necessary parameters then click Finish. Press Restart to restart the router or press to restart the router or press continue to setup another function. to setup another function.
  • Page 56 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Press restart to restart the router or press continue to setup another function. Press restart to restart the router or press continue to setup another function. This level enables basic firewall security, all DoS protection, and the SPI filter function. This level enables basic firewall security, all DoS protection, and the SPI filter function.
  • Page 57 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Press Finish to finish setting firewall. finish setting firewall. The screen will prompt the parameters, which will be written in EPROM. Check the parameters. The screen will prompt the parameters, which will be written in EPROM. Check the parameters. The screen will prompt the parameters, which will be written in EPROM.
  • Page 58 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Press restart to restart the router or press Continue to setup another function. Press restart to restart the router or press Continue to setup another function. Press restart to restart the router or press Continue to setup another function. Page 58 of 113...
  • Page 59 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual User can determine the security level for User can determine the security level for special purpose, environment, and applications by special purpose, environment, and applications by configuring the DoS protection and defining an extra packet filter with higher priority than the configuring the DoS protection and defining an extra packet filter with higher priority than the configuring the DoS protection and defining an extra packet filter with higher priority than the default SPI filter.
  • Page 60 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Page 60 of 113...
  • Page 61 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Click Advanced Firewall Security and then press Finish. Click Advanced Firewall Security and then press Finish. A SYN flood attack attempts to slow your network by requesting new connections but not A SYN flood attack attempts to slow your network by requesting new connections but not A SYN flood attack attempts to slow your network by requesting new connections but not completing the process to open the connection.
  • Page 62 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Traditional firewall are stateless meaning they have no memory of the connections of data or Traditional firewall are stateless meaning they have no memory of the connections of data or Traditional firewall are stateless meaning they have no memory of the connections of data or packets that pass through them.
  • Page 63 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Protocol: ANY Direction: INBOUND (INBOUND is from WAN to LAN, and OUTBOUND is L Direction: INBOUND (INBOUND is from WAN to LAN, and OUTBOUND is LAN to WAN.) AN to WAN.) Description: Hacker Src.
  • Page 64 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual 172.16.1.1:25 192.168.3.4:1234 192.168.3.4:1234 Internet Firewall SMTP Client SMTP Client SMTP Server Packet Direction Source Source Destination Protocol Dest. Port Port Action (Rule) Outbound 172.16.1.1 172.16.1.1 192.168.3.4 Permit (C) Inbound 192.168.3.4 192.168.3.4 172.16.1.1 1357 Permit (D) 172.16.1.1:1357...
  • Page 65 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Rule Order The rules order affects the filtering result. The filtering process will proceed from top to bottom, The rules order affects the filtering result. The filtering process will proceed from top to bottom, The rules order affects the filtering result.
  • Page 66 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual IP QoS IP QoS is a good function to decide which PCs can get the priorities to pass though router once if to decide which PCs can get the priorities to pass though router once if to decide which PCs can get the priorities to pass though router once if the bandwidth is exhausted or fully saturated.
  • Page 67 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual This is an example for your reference, This is an example for your reference, 192.168.1.60 is the highest priority to undergo 192.168.1.60 is the highest priority to undergo the over full bandwidth situation. the over full bandwidth situation.

  • Page 68: Administration

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Administration This session introduces security and simple network management protocol (SNMP) and time This session introduces security and simple network management protocol (SNMP) and time This session introduces security and simple network management protocol (SNMP) and time synchronous.
  • Page 69 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Security For system secutiry, suggest to change the default user name and password in the first setup For system secutiry, suggest to change the default user name and password in the first setup For system secutiry, suggest to change the default user name and password in the first setup otherwise unauthorized persons can access the router and change the parameters.
  • Page 70 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual The browser will prompt the The browser will prompt the configured parameters and check it before writing into EPROM. configured parameters and check it before writing into EPROM. Press Restart to restart the gateway working with the new parameters and press to restart the gateway working with the new parameters and press to restart the gateway working with the new parameters and press Continue to setup other parameters.
  • Page 71 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Access Right: Deny for deny all access Access Right: Deny for deny all access Access Right: Read for access read only Access Right: Read for access read only Access Right: Write for access read and write. Access Right: Write for access read and write.

  • Page 72: Time Sync

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual The browser will prompt the configured parameters and check it before writing into EPROM. The browser will prompt the configured parameters and check it before writing into EPROM. The browser will prompt the configured parameters and check it before writing into EPROM. Press Restart to restart the gateway working with the new parameters and press to restart the gateway working with the new parameters and press to restart the gateway working with the new parameters and press Continue to...
  • Page 73 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual SNTP is the acronym for Simple SNTP is the acronym for Simple Network Time Protocol, which is an adaptation of the Network Network Time Protocol, which is an adaptation of the Network Time Protocol (NTP) used to synchronize computer clocks in the Internet.

  • Page 74: Utility

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Utility This section will describe the utility of the product including system information, load the factory This section will describe the utility of the product including system information, load the factory This section will describe the utility of the product including system information, load the factory default configuration, upgrade the firmware logout and restart the gateway.
  • Page 75 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Note: All of the settings will be changed to factory default. On the other hand you will lose all the All of the settings will be changed to factory default. On the other hand you will lose all the All of the settings will be changed to factory default.

  • Page 76: Status

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Status You can monitor the SHDSL or SHDSL.bis status including mode, You can monitor the SHDSL or SHDSL.bis status including mode, Tx power and Bitrate and Tx power and Bitrate and Performance information including SNR margin, atteunation and CRC error count. Performance information including SNR margin, atteunation and CRC error count.

  • Page 77: Lan-To-Lan Connection With Bridge Mode Lan Connection With Bridge Mode

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual LAN-to-LAN connection with bridge Mode LAN connection with bridge Mode CO side Click Bridge and CO Side to setup Bridging mode of the Router and then click Side to setup Bridging mode of the Router and then click Side to setup Bridging mode of the Router and then click Next.

  • Page 78: Cpe Side

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual WAN1 Parameters Enter VPI: 0 Enter VCI: 32 Click LLC Click Next The screen will prompt the new configured parameters. Check the parameters and The screen will prompt the new configured parameters. Check the parameters and The screen will prompt the new configured parameters.
  • Page 79 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual LAN Parameters Enter IP: 192.168.0.2 Enter Subnet Mask: 255.255.255.0 255.255.255.0 Enter Gateway: 192.168.0.2 Enter Host Name: SOHO WAN1 Parameters Enter VPI: 0 Enter VCI: 32 Click LLC Click Next The screen will prompt the new configured parameters. Check the parameters and The screen will prompt the new configured parameters.

  • Page 80: Lan To Lan Connection With Routing Mode Lan To Lan Connection With Routing Mode

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual LAN to LAN Connection with Routing Mode LAN to LAN Connection with Routing Mode CO side Click ROUTE and CO Side then press then press Next. Type LAN parameters: IP Address: 192.168.20.1 Subnet Mask: 255.255.255.0 255.255.255.0 Host Name: SOHO...
  • Page 81 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Type the Wan Parameters; VPI: 0 VCI: 32 AAL5 Encap: LLC Protocol: IPoA , EoA , IPoA + + NAT or EoA + NAT Note: The Protocol used in CO and CPE have to be the same. Note: The Protocol used in CO and CPE have to be the same.

  • Page 82: Cpe Side

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual IP Address: 192.168.30.1 Subnet mask: 255.255.255.0 255.255.255.0 Gateway: 192.168.30.2 Click Next The screen will prompt the parameters that will be written in EPROM. Check the parameters before screen will prompt the parameters that will be written in EPROM. Check the parameters before screen will prompt the parameters that will be written in EPROM.
  • Page 83 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Type LAN parameters: IP Address: 192.168.10.1 Subnet Mask: 255.255.255.0 255.255.255.0 Host Name: SOHO DHCP Service: For more DHCP service, review DHCP Service. DHCP Service: For more DHCP service, review DHCP Service. Type the Wan Parameters; VPI: 0 VCI: 32 AAL5 Encap: LLC...
  • Page 84 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual IP Address: 192.168.30.2 Subnet mask: 255.255.255.0 255.255.255.0 Gateway: 192.168.30.1 Click Next The screen will prompt the parameters that will be written in EPROM. Check the parameters before The screen will prompt the parameters that will be written in EPROM. Check the parameters before The screen will prompt the parameters that will be written in EPROM.

  • Page 85: Configuration Via Serial Console Or Telnet With Manu Driven

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Configuration via Serial Console or Telnet with Manu Configuration via Serial Console or Telnet with Manu Configuration via Serial Console or Telnet with Manu Driven Interface Serial Console Check the connectivity of the RS Check the connectivity of the RS-232 cable from your computer to the serial port of ROUTER.

  • Page 86: Configuration Via Serial Console Or Telnet Configuration Via Serial Console Or Telnet

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Configuration via Serial Console or Telnet Configuration via Serial Console or Telnet For serial console and Telnet management, the For serial console and Telnet management, the ROUTER implements two operational interfaces: implements two operational interfaces: command line interface (CLI) and menu driven interface.

  • Page 87: Window Structure

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Window structure Window structure From top to bottom, the window will be divided into four parts: From top to bottom, the window will be divided into four parts: Product name Menu field: Menu tree is prompted on this field. “ Menu field: Menu tree is prompted on this field.
  • Page 88 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual User/ Enable Setup Mode Mode Password more ... SHDSL SHDSL more ... SHDSL SHDSL.bis more ... more ... Bridge Bridge more ... VLAN VLAN more ... more ... Route Route more ... more ...
  • Page 89 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Setup Mode SHDSL Mode N*64 Type Clear Margin SHDSL.bis Mode Link Protocol N*64 Address Type Vpi_Vci Clear Encap Margin Tcpam IP_type IP_type List List Bridge Gateway Static Deny_PCs VLAN Mode Delete Lan1_port port Modify Pvid...
  • Page 90 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Setup Ip_type Address Attrib IP_Share Virtual Range Global Range Delete Interface Interface List Delete Delete List Fixed Modify Interface Clear Delete Modify Interface Interface List List Port Server Active Protocol Protocol Address Name Firewall Level...
  • Page 91 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual more ... Enable Setup Setup more ... Status Status more ... Show Show Write Write Reboot Reboot Ping Ping Admin Admin User Clear Modify Attrib List Profile Security Port IP_pool Modify List Clear SNMP Community...

  • Page 92: Configuration

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Configuration To setup the router, move the cursor “ To setup the router, move the cursor “ >>” to enable and press enter key. While the screen and press enter key. While the screen appears, type the supervisor password.

  • Page 93: Status

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Status You can view running system status of SHDSL, WAN, route and interface via You can view running system status of SHDSL, WAN, route and interface via You can view running system status of SHDSL, WAN, route and interface via status command. Move cursor “...

  • Page 94: Show

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Show You can view the system information, configuration and configuration in command script by You can view the system information, configuration and configuration in command script by You can view the system information, configuration and configuration in command script by show command.

  • Page 95: Administration

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Administration You can modify the user profile, telnet access, SNMP (Sample Network Management Protocol), You can modify the user profile, telnet access, SNMP (Sample Network Management Protocol), You can modify the user profile, telnet access, SNMP (Sample Network Management Protocol), supervisor information and SNTP (Simple Network Time Protocol) in supervisor information and SNTP (Simple Network Time Protocol) in admin.
  • Page 96 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Move the cursor “ >> “ to security security and press enter. The default legal address is 0.0.0.0. It means and press enter. The default legal address is 0.0.0.0. It means that there is no restriction of IP to access the ro that there is no restriction of IP to access the router via telnet.
  • Page 97 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Supervisor password and ID Supervisor password and ID The supervisor password and ID are the last door for security but the most important. Users who The supervisor password and ID are the last door for security but the most important. Users who The supervisor password and ID are the last door for security but the most important.
  • Page 98 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Move the cursor to service and press enter. Move the cursor to service and press enter. ---------------------------------------------------------------------- ---------------------------------------------------------------------- Command: admin sntp service <Disable|Enable> Command: admin sntp service <Disable|Enable> Message: Please input the following information. Message: Please input the following information.

  • Page 99: Setup

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Exit If you want to exit the system without saving, use If you want to exit the system without saving, use exit command to quit system. command to quit system. Setup All of the setup parameters are located in the subdirectories of setup. Move the cursor “ All of the setup parameters are located in the subdirectories of setup.
  • Page 100 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Clear command can clear CRC error count. Clear command can clear CRC error count. Generally, you cannot need to change SNR margin, which range is from 0 to 10. SNR margin is an ly, you cannot need to change SNR margin, which range is from 0 to 10.
  • Page 101 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual The router supports 8 PVC, private virtual circuit, and so you can setup eight WAN, WAN1 to The router supports 8 PVC, private virtual circuit, and so you can setup eight WAN, WAN1 to The router supports 8 PVC, private virtual circuit, and so you can setup eight WAN, WAN1 to WAN8.
  • Page 102 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Bridge You can setup the bridge parameters in bridge command. If the product is configured as a router, You can setup the bridge parameters in bridge command. If the product is configured as a router, You can setup the bridge parameters in bridge command.
  • Page 103 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Frames are sent out tagged or untagged depend on if the egress port is a tagged Frames are sent out tagged or untagged depend on if the egress port is a tagged Frames are sent out tagged or untagged depend on if the egress port is a tagged or •...
  • Page 104 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual To assign PVID (Port VID), move the cursor “>>” to PVID and press enter. The port index 1 to 4 To assign PVID (Port VID), move the cursor “>>” to PVID and press enter. The port index 1 to 4 To assign PVID (Port VID), move the cursor “>>”...
  • Page 105 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual network packets’ route based on the fewest number of hops network packets’ route based on the fewest number of hops between the source and the between the source and the destination. The RIP protocol regularly broadcasts routing information to other routers on the destination.
  • Page 106 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual LAN interface parameters can be configured LAN IP address, subnet mask and NAT network t LAN interface parameters can be configured LAN IP address, subnet mask and NAT network t LAN interface parameters can be configured LAN IP address, subnet mask and NAT network type. >>...
  • Page 107 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual ---------------------------------------------------------------------- ---------------------------------------------------------------------- Command: setup ip_share nat virtual range <1~5> <ip> <1~253> Command: setup ip_share nat virtual range <1~5> <ip> <1~253> Message: Please input the following information. Message: Please input the following information. NAT local address range entry number <1~5>: NAT local address range entry number <1~5>: 1 Base address: 192.168.0.2...
  • Page 108 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual To modify fixed IP address mapping, move the cursor “ To modify fixed IP address mapping, move the cursor “>>” to fixed command and press enter. command and press enter. >> modify Modify fixed NAT mapping Modify fixed NAT mapping interface...
  • Page 109 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual port TCP/UDP port number TCP/UDP port number server Host IP address and port number Host IP address and port number protocol Transport protocol Transport protocol name Service name Service name begin The schedule of beginning time The schedule of beginning time The schedule of ending time The schedule of ending time...

  • Page 110: Packet Filtering

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Level three, advanced, is an advanced level of firewall where user can determine the security level Level three, advanced, is an advanced level of firewall where user can determine the security level Level three, advanced, is an advanced level of firewall where user can determine the security level for special purpose, environment, and applications by configuring the DoS protection and defining al purpose, environment, and applications by configuring the DoS protection and defining...
  • Page 111 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual UDP Flood: A sender transmits a volume of requests for UDP diagnostic services which cause all UDP Flood: A sender transmits a volume of requests for UDP diagnostic services which cause all UDP Flood: A sender transmits a volume of requests for UDP diagnostic services which cause all CPU resources to be consumed serving the phony requests.
  • Page 112 SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual The port type is configured by The port type is configured by protocol command. The local ip range is configured by local_ip command. The local ip range is configured by local_ip command. The remote ip range is configured by remote_ip command.

  • Page 113: Dns Proxy

    SMARTLINK I&II MDS921AE-10BTS - MDS S957AE-10BTS User Manual Ip_range command is to configure dynamic assigned IP address range. command is to configure dynamic assigned IP address range. The dynamic IP maximum lease time is configured by The dynamic IP maximum lease time is configured by lease_time command. You can setup 3 domain name servers v You can setup 3 domain name servers via name_server commands.

This manual is also suitable for:

Mds957ae-10bts-r2

Table of Contents