Installation; Before Installation - Lamona LAM3801 Instructions And Installation

LAMONA Appliances

Installation

Before installation

The product should only be installed by suitably
The product must be installed in accordance
with all local regulations.
Prior to installation, visually check the product
for any damage/defects. Do not install if any issues
are found.
Damaged products may cause risks to your own
safety.
Tower Installation
20 mm
595mm
595mm
Page _ 19
560mm
560 mm
min depth
585mm
(min)
560mm
*
580mm
545mm
20 mm
595mm
595mm
www.howdens.com
The appliance is intended for installation in
Howdens kitchen cabinets.
Surfaces, synthetic laminates and adhesives
used must be heat resistant.
If there is a drawer beneath the oven, a shelf
must be installed between oven and drawer.
The following installation drawings are
representational and may not match exactly
with your appliance.
*
Note: Remove carcass rear panel to
assist with ventilation.
* Minimum of 150mm² ventilation
gap is required as illustrated (min
45mm x 350mm) cut-out positioned
centrally.
560 mm
min depth
560mm
580mm
Built under installation
545mm
560mm
*
585mm
(min)