Using The Sd Card - ProMinent DULCOMARIN II Supplementary Instructions Manual

ProMinent ®
Structure and function of the videographic recorder / Using the SD card
Information line for the selected measured value
The information line for the selected measured value displays its exact value. You select a
measured value with the cursor (see below "Bar with function keys").
The sequence of the displayed values is:
• No. of the measured value
• Measured value
• Value of the control variable
• Date of the measurement
• Time of the measurement
• (Display number)
Bar with function keys
In the bar with function keys there are two pairs of function keys, F2 ZOOM- / F3 ZOOM+
and F4 <CURSOR /F5 CURSOR>:
You can use the F2 ZOOM- / F3 ZOOM+ pair of function keys to zoom in and out of the y-axis for
the parameter.
NOTE
When the recorder receives the next measured value, the view jumps back to the normal
view again (after 5 min. at the latest). The view also reverts back to the normal view each
time you change to a different display.
You can use the F4 <CURSOR /F5 CURSOR> pair of function keys to move the blue cursor in the
chart for the parameter (it might be positioned on the y-axis to begin with).
More information
The time interval at which the DULCOMARIN
When the trace has reached the full chart width, an old value disappears on the left for each new
value that appears on the right.
®
The DULCOMARIN II stores the current day's measured values.
®
The DULCOMARIN II stores the previous day's measured values from 0 h to 24 h as files for
each parameter and for each pool.
When an SD card is fitted, the DULCOMARIN
5

Using the SD card

Requirement:
A PC with Windows 98 or later and a USB adaptor is required.
Use the SD card when the measured values must be stored for longer than 24 hours (or if you
don't want the "!Please insert SD card!!" error message to be displayed)
The SD card storage capacity required depends on the number of days to be stored and the
number of pools (see Table 1 in the "Technical data" section). The SD card supplied has a
capacity of 64 MB.
IMPORTANT
When the recorder is in service, an empty card must be fitted in good time before the
number of days that can be stored - from Table 1 - runs out (except for the current day's
files)!
Otherwise the files for subsequent days will be lost as the DULCOMARIN
data on the SD card!
® II records the measured values is 5 min.
®
II stores these files on the SD card until it is full.
®
II cannot erase
Page 7