About This Product; Storage And Transport; Setting Up The Videographic Recorder - ProMinent DULCOMARIN II Supplementary Instructions Manual

About this product / Storage and transport / Setting up the videographic recorder
Fig. 1:
The PLOT tab on an
inactive videographic
recorder
Page 4
1

About this product

The videographic recorder for the swimming pool controller DULCOMARIN
solution that makes an expensive peripheral device superfluous. Designed as a 16-way,
2 x 5-channel recorder, it displays the measured values for pH value, redox value, concentration
for free Cl and combined Cl and temperature, together with the corresponding control variables
(not for temperature) for each of up to 16 pools. Without an SD card the measurement results for
a 24 h period can be stored; with an SD card the measurement results for periods of 35 days to
12 years can be stored, depending on specific requirements.
The simple TXT-files on the SD card can be copied to a PC and edited as graphics using EXCEL,
for example.
2

Storage and transport

The standard delivery includes the DXCa update kit consisting of:
• SD card, 64 MB
• card reader
IMPORTANT
• Store and transport the card reader and SD card in the original packaging!
• Also protect the entire DXCa update kit from damp and the effects of chemicals!
Environmental conditions for storage and transport
Temperature: 0 °C ... 45 °C
Humidity: 10 % ... 90 % relative humidity, non-condensing
3

Setting up the videographic recorder

PLOT
Plotting parameters
Plotting :
inactive
HELP ToneOff
If the icon for the videographic recorder is not present on the far left in the central menu item,
proceed as follows:
Press the F4 CONFIG function key in the central menu item
Press the F2 OPTION function key in the Configure menu item
Press the ENTER key on the PLOT tab
Use the UP and DOWN arrow keys to choose the "active" selection and press the ENTER key
Press the F5 SAVE function key
Move back to the central menu item with the ESC key.
75
SAVE
®
II is a software
ProMinent ®