Select A Play Source - Philips HTS3020/05 User Manual

2
Press to change the volume level,
then press OK .
The test tone is emitted from the
»
speaker.
• Repeat the above setting for other
speakers until all the speakers'
output level sounds equally balance.
• To exit the menu, press
To set the output delay time (centre and rear
speakers only)
1
Select [Speakers Delay] in the menu,
then press .
Speakers Distance Setup
Center
Rear Left
Rear Right
2
Press to set the delay time, then press
OK .
• Repeat the above setting for other
speakers until the sound output from
different speakers reach the listening
position at the same time.
• To exit the menu, press
Tip
•
Set a longer delay time if the centre speaker or rear
speaker is closer to the listening position than the
front speaker.
•
Allow 1ms setting for every 1 foot distance between
the speaker and the listening position.

Select a play source

On the main unit
SETUP .
•
On the remote control
0MS
0MS
0MS
•
Display
SCART IN
AUX 1
AUX 2
SETUP .
•
•
•
SOURCE button repeatedly to
Press the
select: DISC > USB > FM > AUX 1 >
AUX 2 > SCART IN > DISC ...
AUDIO SOURCE repeatedly to
Press
switch to the connected audio source.
Device connected to
SCART TO TV jack
AUDIO IN-AUX 1 jacks
AUDIO IN-AUX 2 jacks
RADIO to switch to FM band.
Press
Press USB to switch to USB mode.
Press DISC to switch to disc mode.
EN
15