1
Connect the audio cables (not supplied)
to the AUDIO IN-AUX2 jacks on the
Home Theater System and the AUDIO
output jacks on the device.
Note
•
To listen to the audio output from this connection,
press AUDIO SOURCE repeatedly until 'AUX2' is
displayed on the display panel.
Connect USB device
1
Connect the USB device to
on this Home Theater System.
Note
•
This Home Theater System can only play/view MP3,
WMA, DivX (Ultra) or JPEG fi les that are stored on
such devices.
•
USB to access the content and play the fi les.
Press
EN
12
Connect power cord
•
1
USB jack
Warning
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back or the underside of the Home Theater
System.
Connect the power cord to the socket
when all the required connections are
made.
The Home Theater System is ready to
»
be set up for use.