Select A Play Source - Philips HTS3373/98 User Manual

1
Press DISC .
2
Press SETUP .
» [General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup] , then press .
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
»
Once complete, audio input mapping
menu is displayed.
Audio Input Mapping
Aux 1
Aux 2
Coaxial In
Optical In
For example, if the TV audio is
connected to the AUX1 jack on this
Home Theater System, select [Aux1]
and map with the TV (brand name) at
the right panel.
6
Select the audio input of this Home
Theater System that is used to connect to
other HDMI device (e.g. AUX1, AUX2),
then press .
7
Select the correct connected device, then
press OK .
»
Repeat steps 5~7 to map other
connected devices.
8
Press SETUP to exit the menu.
[TV]
[DVD 3400]
other (Non-HDMI)

Select a play source

On the main unit
• Press SOURCE button repeatedly to
select: DISC > USB > FM > AUX 1 >
AUX 2 > COAX IN > OPTI IN > MP3
LINK > DISC ...
On the remote control
• Press AUDIO SOURCE repeatedly to
switch to the connected audio source:
Display Device connected to
AUX 1 AUDIO IN-AUX1 jacks
AUX 2 AUDIO IN-AUX2 jacks
COAX IN DIGITAL IN-COAXIAL
jack
OPTI IN DIGITAL IN-OPTICAL jack
MP3 LINK MP3 LINK jack
• Press RADIO to switch to FM band.
• Press USB to switch to USB mode.
• Press DISC to switch to disc mode.
EN 19