Select A Play Source - Philips HTS3373 User Manual

5
Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
»
Once complete, the audio input
mapping menu is displayed.
Audio Input Mapping
For example, if the TV audio is
connected to the AUX jack on this
Home Theatre System, select [Aux]
and map with the TV (brand name) at
the right panel.
6
Select the audio input of this Home
Theatre System that is used to connect to
other HDMI devices (e.g. AUX, SCART
IN), then press .
7
Select the correct connected device, then
press OK .
»
Repeat steps 5–7 to map other
connected devices.
8
Press SETUP to exit the menu.
18 EN

Select a play source

On the main unit
• Press the SOURCE button repeatedly to
select: DISC > USB > FM > SCART IN
> AUX > COAX IN > OPTI IN > MP3
LINK > DISC ...
On the remote control
• Press AUDIO SOURCE repeatedly to
switch to the connected audio source:
Display Device connected to
AUX AUDIO IN-AUX sockets
SCART IN SCART TO TV socket
COAX IN COAXIAL DIGITAL IN
socket
OPTI IN OPTICAL DIGITAL IN
socket
MP3 LINK MP3 LINK socket
• Press RADIO to switch to the FM band.
• Press USB to switch to USB mode.
• Press DISC to switch to disc mode.