Select A Play Source - Philips HTS3180 User Manual

• Repeat the above setting for other
speakers until all the speakers output
level sounds equally balance.
• To exit the menu, press
To set the output delay time (center and rear
speakers only)
1
Select [Speakers Delay] in the menu,
then press .
Speakers Distance Setup
Center
Rear Left
Rear Right
2
Press to set the delay time, then press
OK .
• Repeat the above setting for other
speakers until the sound output from
different speakers reach the listening
position at the same time.
• To exit the menu, press
Tip
•
Set a longer delay time if the center speaker or
rear speaker is closer to the listening position
than the front speaker.
•
Allow 1ms setting for every 1 foot distance
between the speaker and the listening position.

Select a play source

On the main unit
SETUP .
•
0MS
0MS
0MS
On the remote control
SETUP .
•
Display
SCART IN
AUX 1
AUX 2
•
•
•
SOURCE button repeatedly to
Press
select: DISC > USB > FM > AUX 1 >
AUX 2 > SCART IN > DISC ...
Press AUDIO SOURCE repeatedly to
switch to the connected audio source.
Device connected to
SCART TO TV jack
AUDIO IN-AUX 1 jacks
AUDIO IN-AUX 2 jacks
Press RADIO to switch to FM band.
USB to switch to USB mode.
Press
DISC to switch to disc mode.
Press
EN 15