Select A Play Source - Philips HTS3373/51 User Manual

Map the devices to the audio inputs
Note
•
Before you start, ensure that the audio output
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theater System.
General Setup General Setup
EasyLink Setup EasyLink Setup
Disc Lock Disc Lock
Display Dim Display Dim
OSD Language OSD Language
Screen Saver Screen Saver
Sleep Timer Sleep Timer
DivX(R) VOD Code DivX(R) VOD Code
1
Press DISC.
2
SETUP.
Press
[General Setup] menu is displayed.
»
3
Press .
4
Select [EasyLink Setup], then press .
[One Touch Play] and [One Touch
•
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On],
then press OK to start scanning devices.
» Once complete, audio input mapping
menu is displayed.
Audio Input Mapping Audio Input Mapping
Aux 1 Aux 1
Aux 2 Aux 2
Coaxial In Coaxial In
Optical In Optical In
For example, if the TV audio is
connected to the AUX1 jack on this
EasyLink EasyLink
One Touch Play One Touch Play
One Touch Standby One Touch Standby
System Audio Control System Audio Control
Audio Input Mapping Audio Input Mapping
[TV] [TV]
[DVD 3400] [DVD 3400]
other (Non-HDMI) other (Non-HDMI)
Home Theater System, select [Aux1]
and map with the TV (brand name) at
the right panel.
6
Select the audio input of this Home
Theater System that is used to connect to
other HDMI device (e.g. AUX1, AUX2),
then press .
7
Select the correct connected device, then
press OK.
Repeat steps 5~7 to map other
»
connected devices.
8
SETUP to exit the menu.
Press

Select a play source

On the main unit
• Press SOURCE button repeatedly to
select: DISC > USB > FM >AUX 1 >
AUX 2 > COAX IN> OPTI IN > MP3
LINK > DISC ...
On the remote control
• Press AUDIO SOURCE repeatedly to
switch to the connected audio source:
EN
19