How To Select The Program; Starting Program; Display During The Treatment - Globus My Stim User Manual

How to select the program.

By buttons Up e Down select the number of the program. Press OK to confirm.
During the choice the following parameters are displayed:
number of phases the program name (up) and the program duration (left up).

Starting program.

After the program selection, use switches to increase the intensity of each channel or switch to
increase the intensity on all channels simultaneously.

Display during the treatment.

During the treatment execution the display will show you the following parameters: the number
of program (top left), how many phases the program consists of, in which phase you are (the cur-
rent square is filled), the remaining time of the ongoing phase (top right).
Multi_Elite_Mystim_Rev. 09.14 data di emissione 29_09_14
49